科研成果
2012-2017年实验室发表的论文(SCI/EI/国内期刊)
发布时间:2018-09-11
序号 | 论文名称 | 刊物名称 | 年/卷/期/页 | SCI/EI/国内期刊 | 论文作者 |
1 | Effects of ion implantation on the brazing properties of high purity alumina | Surface & Coatings Technology | 2012,206(8):2098-2104 | SCI,EI | Xia Haiyang, Wu Aiping, Fan Yinglong, Zou Guisheng, Ren Jialie |
2 | Influence factors of dynamic recrystallization of 7050 aluminium alloy friction stir weld | Transactions of the China Welding Institution | 2012,33(8):89-92 | EI | ZHANG Chengcong,CHANG Baohua, TAO Jun,ZHANG Tiancang |
3 | Anisotropic interfacial friction of inclined multiwall carbon nanotube array surface | Carbon | 2012,50(15):5372-5379 | SCI,EI | Zhou, Ming ; Liu, Kai ; Wan, Jin ; Li, Xiao ; Jiang, Kaili ; Zeng, Hongbo ; Zhang, Xiangjun ; Meng, Yonggang ; Wen, Shizhu ; Zhu, Hongwei ; Tian, Yu |
4 | Bubble-promoted assembly of hierarchical, porous Ag2S nanoparticle membranes | Journal of Materials Chemistry | 2012,22(47):24721-24726 | SCI,EI | Li, Peixu; Li, Zhen; Zhang, Luhui; Shi, Enzheng; Shang, Yuanyuan; Cao, Anyuan; Li, Hongbian; Jia, Yi; Wei, Jinquan; Wang, Kunlin; Zhu, Hongwei; Wu, Dehai |
5 | Cellular automaton simulation of peritectic solidification of a C-Mn steel | China Foundry | 2012,9(3):221-225 | SCI | Su, B; Han, ZQ; Liu, BC |
6 | Compressive properties of aluminum foams by gas injection method | China Foundry | 2012,9(3):215-220 | SCI | Zhang, HM; Chen, X; Fan, XL; Li, YX |
7 | Controllable growth of triangular hexagonal boron nitride domains on copper foils by an improved low-pressure chemical vapor deposition method | Nanotechnology | 2012,23(41):415605 | SCI,EI | Guo, Ning; Wei, Jinquan; Fan, Lili; Jia, Yi; Liang, Dayao; Zhu, Hongwei; Wang, Kunlin; Wu, Dehai |
8 | Effects of Fe addition on glass-forming ability and mechanical properties of Ti-Zr-Be bulk metallic glass | Journal Of Alloys and Compounds | 2012,536(38):26-29 | SCI,EI | Gong, P; Yao, KF; Shao, Y |
9 | Effects of low power CO2 laser irradiation on structure of multilayer graphene | Chinese Journal of Lasers | 2012,39(12):1-5 | 国内期刊 | Long, Jiangyou ; Huang, Ting ; Ye, Xiaohui ; Lin, Zhe ; Zhong, Minlin ; Jiang, Juan ; Li, Lin |
10 | Effects of structure characteristics of carbon nanotubes on properties of composites | Journal Of Alloys and Compounds | 2012,31(16):1097-1102 | SCI,EI | Zhu, YF; Chen, WJ; Jiang, Y; Wang, FY |
11 | Experimental analysis on fusion ratio and composition uniformity of laser hot wire welds | Transactions of the China Welding Institution | 2012,33(12):45-48 | EI | Zheng, Shiqing; Wen, Peng ; Shan, Jiguo |
12 | Improved Hermite finite element smoothing method for full-field strain measurement over arbitrary region of interest in digital image correlation | OPTICS AND LASERS IN ENGINEERING | 2012,50(11):1662-1671 | SCI,EI | Zhao, JQ; Zeng, P; Pan, B; Lei, LP; Du, HF; He, WB; Liu, Y; Xu, YJ |
13 | Improvement of Bondability by Depressing the Inhomogeneous Distribution of Nanoparticles in Low Temperature Bonding Process with Silver Nanoparticles | Journal of Electronic Materials | 2012,41(7):1924-1930 | SCI,EI | JIANFENG YAN,GUISHENG ZOU,AIPING WU, JIALIE REN, ANMING HU and Y.NORMAN ZHOU |
14 | Intelligent Freeform Manufacturing of Complex Organs | ARTIFICIAL ORGANS | 2012,36(11):951-961 | SCI | Xiaohong Wang |
15 | Modelling dispersion behavior of low-dimensional carbon nanofillers in liquids | Carbon | 2012,50(8):3110-3112 | SCI,EI | Chen, Wen-Jia; Zhu, Yue-Feng; Wang, Sheng-Xi; Jiang, Yin |
16 | Multi-ram forge process and its equipment development | Journal of Mechanical Engineering | 2012,48(18):13-20 | EI | Lin, Feng; Zhang, Lei; Sun, Fu; Liu, Yongqian; Li, Gaihua; Zhang, Renji |
17 | Numerical simulation of dendrite growth with different preferred growth orientation angles | Chinese Journal of Nonferrous Metals | 2012,22(12):3468-3475 | EI | Shi, Yu-Feng ; Xu, Qing-Yan ; Liu, Bai-Cheng |
18 | Numerical simulation of macrosegregation in steel ingots using a two-phase model | International Journal of Minerals, Metallurgy and Materials | 2012,19(9):787-794 | EI | Li, Wen-Sheng; Shen, Hou-Fa; Liu, Bai-Cheng |
19 | Numerical simulation of stress of adjustment sheet during investment casting process | Chinese Journal of Nonferrous Metals | 2012,22(7):1897-1903 | EI | Hong, Yao-Wu; Wang, Tie-Jun; Han, Da-Ping; Xu, Qing-Yan; Liu, Bai-Cheng |
20 | On-site turbine blade repairing robot with self-positioning function | Transactions of the China Welding Institution | 2012,33(8):21-24 | EI | Ma, Xiande; Chen, Qiang; Sun, Zhenguo; Zhang, Wenzeng |
21 | Photoinduced molecular desorption from graphene films | Applied Physics Letters | 2012,101(5):151-161 | SCI,EI | Sun, Pengzhan ; Zhu, Miao; Wang, Kunlin ; Zhong, Minlin ; Wei, Jinquan ; Wu, Dehai ; Cheng, Yao ; Zhu, Hongwei |
22 | Polymer-Protected Cu-Ag Mixed NPs for Low-Temperature Bonding Application | JOURNAL OF ELECTRONIC MATERIALS | 2012,41(7):1886-1892 | SCI,EI | Yan, JF; Zou, GS; Wu, AP; Ren, JL; Hu, AM; Zhou, YN |
23 | Prediction of residual melt ratio in batch type gas injection aluminum foaming process | Chinese Journal of Nonferrous Metals | 2012,22(7):1939-1944 | EI | Liu, Xing-Nan; Li, Yan-Xiang; Chen, Xiang |
24 | Preparation of CuI particles and their applications in carbon nanotube-Si heterojunction solar cells | Materials Letters | 2012,79(23):106-108 | SCI,EI | Wang, Hongguang; Bai, Xi; Wei, Jinquan; Li, Peixu; Jia, Yi; Zhu, Hongwei; Wang, Kunlin; Wu, Dehai |
25 | Selective ion penetration of graphene oxide membranes | ACS Nano | 2012,7(1):428-37 | SCI,EI | Sun, Pengzhan ; Zhu, Miao ; Wang, Kunlin ; Zhong, Minlin ; Wei, Jinquan ; Wu, Dehai ; Xu, Zhiping ; Zhu, Hongw |
26 | Simulation and experimental validation of three-dimensional dendrite growth | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2012,22(11):2756-2761 | SCI,EI | Shi, YF; Xu, QY; Liu, BC |
27 | Integration of Simulink External Mode into Cosimulation of Rigid-Flexible Body Dynamics and Control System | Machinery Design & Manufacture | 2012,(12):1-3 | 国内期刊 | YANG Li-ming,ZENG Pan,LEI Li-ping |
28 | Solution-processed bulk heterojunction solar cells based on interpenetrating CdS nanowires and carbon nanotubes | NANO RESEARCH | 2012,5(9):595-604 | SCI | Li, Z; Wei, JQ; Li, PX; Zhang, LH; Shi, EZ; Ji, CY; Liu, J; Zhuang, DM; Liu, ZD; Zhou, J; Shang, YY; Li, YB; Wang, KL; Zhu, HW; Wu, DH; Cao, AY |
29 | Stepping-quenching-partitioning treatment of 20SiMn2MoVA steel and effects of carbon and carbide forming elements | SCIENCE CHINA-TECHNOLOGICAL SCIENCES | 2012,55(7):1838-1843 | SCI,EI | Zhu, YF; Wang, FY; Zhou, HH; Wang, G; Jiang, BZ |
30 | Stress analysis and deformation prediction of a heavy hydraulic turbine blade casting during casting and heat treatment | MATERIALS SCIENCE AND TECHNOLOGY | 2012,28(7):808-811 | SCI,EI | Liu, BC; Kang, JW; Huang, TY |
31 | Stretchable and highly sensitive graphene-on-polymer strain sensors | SCIENTIFIC REPORTS | 2012,2(6109):870- | SCI | Li, X; Zhang, RJ; Yu, WJ; Wang, KL; Wei, JQ; Wu, DH; Cao, AY; Li, ZH; Cheng, Y; Zheng, QS; Ruoff, RS; Zhu, HW |
32 | The Effect of Purification on the Glass-Forming Ability of a Pd-Cu-Si Alloy | Metallurgical and Materials Transactions A | 2012,43(8):2610-2614 | SCI,EI | Ding, HY; Li, Y; Yang, GN; Yao, KF; Qiu, SB |
33 | The formation of graphene-titania hybrid films and their resistance change under ultraviolet irradiation | Carbon | 2012,50(12):4518-4523 | SCI,EI | Sun, Pengzhan; Ma, Renzhi ; Osada, Minoru; Sasaki, Takayoshi ; Wei, Jinquan ; Wang, Kunlin ; Wu, Dehai ; Cheng, Yao ; Zhu, Hongwei |
34 | The study of multiple thermal cycle of HTS YBCO bulk | Physica C Superconductivity | 2012,474(474):25-28 | SCI,EI | Wei Guo, Zou Guisheng, Chai Xiao, Wu Aiping, Zheng Minghui, Jiao Yulei, Ren Jialie |
35 | Ultrasonic SH guided waves imaging and test on complicated TLB welded structure | Transactions of the China Welding Institution | 2012,33(09):29-32 | EI | ZHU Xinjie, HAN Zandong, DU Dong, CHEN Yifang |
36 | Transformation of round-shaped graphene disks into hexagonal domains in CVD | Chemical Vapor Deposition | 2012,18(7):185-190 | SCI,EI | Fan, Lili ; Fan, Xueliu ; Wei, Jinquan; Wang, Kunlin; Wu, Dehai ; Zhu, Hongwei |
37 | Ultrasonic Scanning Imaging for Austenitic Thick-wall Welds | Journal of Materials Engineering | 2012,(09):62-65 | SCI,EI | HAN Zan-dong; WANG Bing-fang; YUAN Ke-yi; ZHU Xin-jie |
38 | STUDY OF HUMPING TENDENCY AND AFFECTING FACTORS IN HIGH SPEED LASER WELDING OF STAINLESS STEEL SHEET | Acta Metallurgica Sinica | 2012,48(12):1431-1436 | SCI,EI | PEI Yinglei, SHAN Jiguo , REN Jialie |
39 | Experiment and Nonlinear Finite Element Analysis of the Buckling Behavior of Fracture Specimen | ENGINEERING & TEST | 2012,52(04):1-3 | 国内期刊 | Ma Yuan,Zeng Pan,Zhao Jiaqing |
40 | Studies on Mechanism of Zigzag Crack Forming Process in Weld Metal of Narrow Gap Submerged Arc Welding of Thick Plate | Journal of Mechanical Engineering | 2012,48(24):67-72 | EI | ZHANG Boqi,CAI Zhipeng,WANG Liang, WU Jiandong,PAN Jiluan |
41 | Research on Forming Process of Tissue-engineering Hydrogel Fibers Based on Sodium Alginate | Space Medicine & Medical Engineering | 2012,25(4):291-295 | EI | Li Mingfeng,Zhang Ting,Sun Wei,Zhang Renji,Xiong Zhuo |
42 | Imaging and inspection of ultrasonic guided waves in a plate based arc array | Journal of Tsinghua University(Science and Technology) | 2012,52(11):1601-1606 | EI | ZHU Xinjie,HAN Zandong,DU Dong,CHEN Yifang,WANG Weibin,FENG Zhanjun |
43 | On-site turbine blade repairing robot with self-positioning function | TRANSACTIONS OF THE CHINA WELDING INSTITUTION | 2012,33(08):21-24 | EI | MA Xiande, CHEN Qiang, SUN Zhenguo,ZHANG Wenzeng |
44 | Crack tendency and mechanical properties of ductile cast iron joint by fiber laser-MIG hybrid welding | Transactions of the China Welding Institution | 2012,33(8):29-32 | EI | ZHENG Shiqing,WENPeng,SHAN Jiguo |
45 | Research on Dynamic Stress of the Suspension Unit of Hydrogenerator Rotor's Magnetic Pole | Large Electric Machine and Hydraulic Turbine | 2012,(4):1-5 | EI | LIU Yajuan,ZHANG Wei ,HONG Yuping,WANG Chao |
46 | 移动式焊接机器人焊缝跟踪控制研究 | 焊接 | 2012,(09):21-24 | 国内期刊 | 柳长春;郑军;吴峰;潘际銮; |
47 | Microstructure evolution during friction stir welding of 2024 aluminum alloy | Transactions of the China Welding Institution | 2013,34(3):57-60 | EI | ZHANG Chengcong, CHANG Baohua,TAO Jun, ZHANG Tiancang |
48 | Fracture characteristic of fiber laser-arc hybrid welded joints of 400 MPa grade ductile cast iron | Transactions of the China Welding Institution | 2013,34(1):89-92 | EI | ZHENG Shiqing,LIU Zhu,SHAN Jiguo,WEN Peng |
49 | Research on surface uniformity control of runner plate for 700 MW hydrogenerator | Forging & Stamping Technology | 2013,38(5):7-12 | EI | LUO Jinping, ZHONG Yuexian,MA Qingxian, YUAN Chaolong |
50 | An ultrasonic SH-guided-wave transducer for ultrasonic imaging and testing of plate with welded structure | Transactions of the China Welding Institution | 2013,34(2):17-21 | EI | Zhu, Xinjie ; Chen, Yifang ; Han, Zandong ; Du, Dong |
51 | Development of a Directly Self-adaptive Robot Hand with Pulley-belt Mechanism | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | 2013,14(8):1361-1368 | SCI | Guoxuan Li;Bowen Li;Jie Sun;Wenzeng Zhang;Zhenguo; SunQiang Chen |
52 | Development of multi-fingered robotic hand with coupled and directly self-adaptive grasp | International Journal of Humanoid Robotics | 2013,9(4): 1-18 | SCI,EI | Li, Guoxuan; Liu, Han; Zhang, Wenzeng |
53 | Effect of welding speed on melt flow behavior in high speed laser welding process | Chinese Journal of Lasers | 2013,40(5): 1-6 | 国内期刊 | Pei, Yinglei; Shan, Jiguo; Ren, Jialie |
54 | Fabrication of a bimodal micro/nanoporous metal by the Gasar and dealloying processes | Materials Letters | 2013,92(1):448-451 | SCI,EI | Zhang, Xingming ; Li, Yanxiang ; Liu, Yuan; Zhang, Huawei |
55 | FEM simulation and experimental study on the quenching residual stress of aluminum alloy 2024 | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B | 2013,227(7):954-964 | SCI,EI | Zhang, Lei; Feng, Xiao; Li, Zhaoguang; Liu, Changyong |
56 | Fracture characteristic of fiber laser-arc hybrid welded joints of 400 MPa grade ductile cast iron | Transactions of the China Welding Institution | 2013,34(1):89-92 | EI | Zheng, Shiqing;Liu, Zhu; Shan, Jiguo;Wen, Peng |
57 | Graphene oxide/titania hybrid films with dual-UV-responsive surfaces of tunable wettability | RSC Advances | 2013,2(29):10829-10835 | SCI,EI | Sun, Pengzhan ; Zhu, Miao ; Ma, Renzhi; Wang, Kunlin ; Wei, Jinquan ; Wu, Dehai ; Sasaki, Takayoshi ; Zhu, Hongw |
58 | High entropy Ti20Zr20Cu20Ni 20Be20 bulk metallic glass | Journal of Non-Crystalline Solids | 2013,364(1):9-12 | SCI,EI | Ding, H.Y.; Yao, K.F. |
59 | Highly deformation-tolerant carbon nanotube sponges as supercapacitor electrodes | NANOSCALE | 2013,5(18):8472-8479 | SCI,EI | Li P, Kong C, Shang Y, Shi E, Yu Y, Qian W, Wei F, Wei J, Wang K, Zhu H, Cao A, Wu D. |
60 | Influence of laser offset on microstructure and mechanical properties of Ti/Al dissimilar joint by laser welding | Transactions of the China Welding Institution | 2013,34(1):105-108 | EI | Song, Zhihua; Wu, Aiping ; Yao, Wei ; Zou, Guisheng ; Ren, Jialie ; Wang, Yongyang |
61 | Influences of Nb and Cr on in situ particle reinforced Fe-matrix composite coating by laser cladding | Chinese Journal of Lasers | 2013,40(7): 1-6 | 国内期刊 | Wu, Qiwen; Ma, Mingxing; Zhu, Tianhui;Zhang, Weiming; Liu, Wenjin; Yang, Lin |
62 | LD10铝合金不均匀焊接接头的力学性能与断裂行为 | 中国机械工程学会焊接学会第十八次全国焊接学术会议论文集 | 2013 | 国内期刊 | 李艳军; 吴爱萍 |
63 | Low temperature sintering-bonding through in-situ formation of Ag nanoparticles using micro-scaled Ag2O composite paste | Transactions of the China Welding Institution | 2013,34(4):38-42 | EI | Mu, Fengwen;Zou, Guisheng ;Zhao, Zhenyu; Wu, Aiping; Yan, Jiuchun; Zhou, Y. Norman |
64 | Mechanical characterization of bioprinted in vitro soft tissue models | BIOFABRICATION | 2013,5(4):45010 | SCI,EI | T Zhang;KC Yan;L Ouyang;W Sun |
65 | Mechanism of Low Temperature Sintering-Bonding through In-Situ Formation of Ag Nanoparticles Using Ag2O Microparticles | Materials Transactions | 2013,54(6):872-878 | SCI,EI | Fengwen Mu, Zhenyu Zhao, Guisheng Zou, Hailin Bai, Aiping Wu, Lei Liu, Dongyue Zhang, Y. Norman Zhou |
66 | Metal-Metal Bonding Process Using Cu+Ag Mixed Nanoparticles | MATERIALS TRANSACTIONS | 2013,54(6):879-883 | SCI,EI | J Yan;G Zou;Y Zhang;J Li;L Liu |
67 | Research and application of MIG vertical welding technology using short circuiting transfer |
Electric Welding Machine | 2013,43(3):45-47 | 国内期刊 | DU Dong, WANG Peng, ZOU Yi-rong, ZHANG Hua, WANG Li |
68 | IN SITU MULTI-FIELDS INVESTIGATION ON INSTABILITY AND TRANSFORMATION LOCALIZATION OF MARTENSITIC PHASE TRANSFORMATION IN NiTi ALLOYS | Acta Metallurgica Sinica | 2013,49(01):17-25 | SCI,EI | DU Hongfei, P Zeng, J Zhao, L Lei, G Fang, |
69 | Optimizing the fabrication processes for manufacturing a hybrid hierarchical polyurethane-cell/hydrogel construct | JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS | 2013,28(4):303-319 | SCI,EI | X Wang;K He;W Zhang |
70 | Phase field simulation on morphology of continuous precipitate Mg17Al12 in Mg-Al alloy | Acta Metallurgica Sinica | 2013,49(3):277-283 | SCI,EI | Han, Guomin ; Han, Zhiqiang ; Luo, Alan A. ; Sachdev, Anil K. ; Liu, Baicheng |
71 | Preparation of an adipose-derived stem cell/fibrin-poly(d,l-lactic-co-glycolic acid) construct based on a rapid prototyping technique | JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS | 2013,28(3):191-203 | SCI,EI | Xinru Zhao;Xiaohong Wang |
72 | Rapid prototyping of a hybrid hierarchical polyurethane-cell/hydrogel construct for regenerative medicine | MATERIALS SCIENCE & ENGINEERING C | 2013,33(6):3220-3229 | SCI,EI | Y Huang;K He;X Wang |
73 | Reducing the Porosity in Die-Cast Magnesium Alloys during Laser Welding | WELDING JOURNAL | 2013,92(4):101-109 | SCI | J Zhang;JG Shan;JL Ren;P Wen |
74 | Research status and development trends of interaction between laser and graphene | Chinese Journal of Lasers | 2013,40(2): 1-14 | 国内期刊 | Jiang, Juan ; Huang, Ting ; Zhong, Minling ; Ye, Xiaohui ; Lin, Zhe ; Long, Jiangyou ; Li, Lin |
75 | Study on the oxygenation process during the heat treatment of TFA-MOD YBCO thin films by in situ resistance measurement | PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS | 2013,494(15):148-152 | SCI,EI | T Qu;Y Xue;F Feng;R Huang;W Wu |
76 | PHASE TRANSFORMATION TEMPERATURE CONTROL OF WELD METAL OF LASER WELDED TiNi SHAPE MEMORY ALLOY JOINT | Acta Metallurgica Sinica | 2013,49(02):199-206 | SCI,EI | YANG Chenggong, SHAN Jiguo, REN Jialie |
77 | TWO-DOF COUPLED AND SELF-ADAPTIVE (COSA) FINGER: A NOVEL UNDER-ACTUATED MECHANISM | Internaltional Journal of Humanoid Robotics | 2013,10(2): 1-26 | SCI,EI | WENZENG ZHANG,DEYANG ZHAO,HAIPENG ZHOU,ZHENGUO SUN,DONG DU |
78 | 北京市生物3D打印产业化路径探究 | 新材料产业 | 2013,(8):25-30 | 国内期刊 | 张人佶;姚睿;张婷;张磊;林峰;孙伟; |
79 | Deformation Behavior of BSCCO Powder during the Drawing Process of Bi-2223/Ag Wire | Rare Metal Materials and Engineering | 2013,42(03):536-540 | SCI,EI | Lu Yongjin,Zeng Pan |
80 | Nonlinear Fluid-Structure Interaction Analysis of the Compression Process of Inflatable Tube Structures | Journal of Basic Science and Engineering | 2013,21(05):918-926 | EI | XU Yuejie, ZENG Pan, LEI Liping, ZHAO Jiaqing, HE Wenbin, DU Hongfei, YANG Yabin, MA Yuan |
81 | Investigation on hollow steel ingot forging process of heavy cylinder forging | Journal of Plasticity Engineering | 2013,20(06):1-8 | EI | LIU Min,DONG Xiaoliang, MA Qingxian |
82 | 电子束选区熔化的数字化扫描系统开发 | 第15届全国特种加工学术会议论文集(下) | 2013:1-10 | 国内期刊 | 郭超;张峻;张靖;葛文君;林峰 |
83 | EFFECTS OF Cr PLATING LAYER ON SHEAR STRENGTH AND INTERFACE BONDING CHARACTERISTICS OF MILD STEEL/CFRP JOINT BY LASER HEATING | Acta Metallurgica Sinica | 2013,49(06):751-756 | SCI,EI | TAN Xianghu,SHAN Jiguo,REN Jialie |
84 | 高速铁路钢轨焊接技术的发展与应用 | 焊接 | 2013,(05):5-10+68 | 国内期刊 | 朱志明;范开果;潘际銮; |
85 | Influence of laser offset on microstructure and mechanical properties of Ti /Al dissimilar joint by laser welding | Transactions of The China Welding Institution | 2013,34(1):105-108 | EI | SONG Zhihua,WU Aiping ,YAO Wei,ZOU Guisheng,REN Jialie ,WANG Yongyang |
86 | High temperature properties of silica sol-gangue shell and its mechanism analysis | Journal of Central South University(Science and Technology) | 2013,44(11):4442-4447 | EI | GUO Xin, LÜ Zhigang, LI Xiaofei |
87 | Grain refinement during plastic forming of 316LN steel used in nuclear main pipes |
J Tsinghua Univ(Sci&Tech) | 2013,53(3):289-294 | EI | PAN Pinli,ZHONG Yuexian,MA Qingxian,YUAN Chaolong |
88 | Simulation on Forming Uniformity of Nuclear Main Pipe Forging | JOURNAL OF MECHANICAL ENGINEERING | 2013,49(10):97-102 | EI | PAN Pinli,ZHONG Yuexian ,MA Qingxian,YUAN Chaolong |
89 | Visual method for weld seam recognition based on multi-feature extraction and information fusion | Transactions of the China Welding Institution | 2013,34(05):33-36 | EI | ZOU Yirong,DU Dong,ZENG Jinle,ZHANG Wenzeng |
90 | Investigation of humping formation based on melt flow analysis in high-speed laser welding process | Acta Metallurgica Sinica | 2013,49(6):725-730 | SCI,EI | PEI Yinglei,WU Aiping,SHAN Jiguo,REN Jialie |
91 | 基于响应曲面法的激光热丝焊多道修复成形质量控制 | 中国机械工程学会焊接学会第十八次全国焊接学术会议论文集——S02高能束及特种焊接 | 2013 | 国内期刊 | 冯振华; 温鹏; 郑世卿 |
92 | 激光热丝焊电阻热控制及送丝参数优化 | 中国机械工程学会焊接学会第十八次全国焊接学术会议论文集——S02高能束及特种焊接 | 2013 | 国内期刊 | 郑世卿; 温鹏; 单际国; 冯振华 |
93 | 激光微熔覆沉积成形TC4薄壁件组织和性能分析 | 第15届全国特种加工学术会议论文集(下) | 2013:7 | 国内期刊 | 姚波;马旭龙;葛文君;林峰 |
94 | Development of welding visualization | Electric Welding Machine, | 2013,43(05):17-19 | 国内期刊 | ZOU Yi-Rong,ZENG Jin-le,DU Dong |
95 | Development of the synthesis of metal nanoparticle paste for electronic packaging | Welding Digest of Machinery Manufacturing | 2013,(1):12-16+34 | 国内期刊 | Zou Guisheng, Yan Jianfeng, Liu Lei, Wu Aiping, Zhang Dongyue,Zhou Yunhong |
96 | Research on a method for grouped tandem pneumatic lifting a pebble-bed reactor's fuel element transportation in pipelines | Chinese High Technology Letters | 2013,23(05):519-524 | 国内期刊 | Shen Peng, Liu Hongbing, Du Dong, Wang Xin, Zhang Haiquan |
97 | Three dimensional bioprinting technology of human dental pulp cells mixtures | Journal of Peking University(Health Sciences) | 2013,45(1):105-108 | EI | XUE Shi-hua,LV Pei-jun,WANG Yong,ZHAO Yu ,ZHANG Ting |
98 | 软开关谐振过程动态稳定性分析与PWM控制波形优化 | 中国机械工程学会焊接学会第十八次全国焊接学术会议论文集——S04计算机辅助焊接工程 | 2013 | 国内期刊 | 朱志明;杨中宇;夏铸亮 |
99 | Anti-welding performance of copper-based electrical contacts in solenoid switch | The Chinese Journal of Nonferrous Metals | 2013,23(8):2213-2220 | EI | LI Quan,DING Min ,WU Aiping ,ZOU Guisheng ,SONG Wei, LI Jian |
100 | Low temperature sintering-bonding through in-situ formation of Ag nanoparticles using micro-scaled Ag2O composite paste |
Transactions of the China Welding Institution
| 2013,34(4):38-42 | EI | MU Fengwen,ZOU Guisheng,ZHAO Zhenyu, WU Aiping,YAN Jiuchun,Y.Norman Zhou
|
101 | 位错和第二相对Al-Mg-Si合金搅拌摩擦焊细晶区存储能的影响 | 中国机械工程学会焊接学会第十八次全国焊接学术会议论文集——S01压力焊 | 2013 | 国内期刊 | 戴启雷,史清宇 |
102 | Experimental Design and Analysis for in Situ Macroscopic Multi-fields Measurements on Transformation Localization in NiTi Alloy |
JOURNAL OF MECHANICAL ENGINEERING | 2013,49(24):15-23 | EI | DU Hongfei, ZENG Pan, LEI Liping, ZHAO Jiaqing, XU Yuejie, HE Wenbin |
103 | Resonant procedure analysis and parameters design approach for phase-shift controlled full-bridge power converter with zero-voltage and zero-current soft-switching | Electric Welding Machine | 2013,43(1):9-14 | 国内期刊 | XIA Zhu-liang,ZHU Zhi-ming,CHEN Jun-jie |
104 | A deceleration system for near-diameter spheres in pipeline transportation in a pebble bed reactor based on the resistance of a pneumatic cushion | Nuclear Engineering and Design | 2014,275:61-68 | SCI,EI | Liu, Hongbing; He, Ayada; Du, Dong ; Wang, Xin ; Zhang, Haiquan |
105 | A smart segmented blade system for reducing weight of the wind turbine rotor | ENERGY CONVERSION AND MANAGEMENT | 2014,(88):535-544 | SCI,EI | HongyaLu,PanZeng,LipingLei,YabinYang,YuejieXu,LingyunQian |
106 | Low temperature sintering-bonding and the performance of joints using Ag2O paste with an adding of Ag-coated Cu particles | Transactions of the China Welding Institution | 2014,35(2):15-18 | EI | ZHAO Zhenyu, MU Fengwen, ZOU Guisheng, LIU Lei, YAN Jiuchun |
107 | MICROSTRUCTURE CHANGE AND ENERGY RELEASE OF FRICTION STIR WELDED Al-Mg-Si ALLOY DURING DSC TEST | ACTA METALLURGICA SINICA | 2014,50(5):587-593 | SCI,EI | DAI Qilei, LIANG Zhifang, WU Jianjun, MENG Lichun, SHI Qingyu |
108 | Influence of AMT on Diacetatozirconic Acid-bonded Yttria Shell and Titanium α-Layer | Rare Metal Materials and Engineering | 2014,43(12):3013-3017 | SCI,EI | Guo Xin, Lü Zhigang |
109 | Critical current density improvement by intermediate deformation for the fabrication of Bi2Sr2Ca2Cu3O10+ /Ag round wires | Materials Express | 2014,4(2):105-114 | SCI | Xie, Peng; Qu, Timing; Huang, Kaite; Feng, Feng; Han, Zhenghe |
110 | Numerical Analysis on the Stress Conditions of Cu/Low-k Chips in Thermosonic Cu Wire Bonding | Semiconductor Technology | 2014,39(10):768-773 | 国内期刊 | Chang Baohua, Bai Xiaoyi, Du Dong |
111 | Indirectly Self-Adaptive Underactuated Robot Hand with Block-Linkage Mechanisms | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | 2014,(15):1553-1562 | SCI | G Li,J Jin,S Deschamps-Berger,Z Sun,W Zhang |
112 | NdFeB永磁体与SPCC钢激光点焊的显微组织特征研究 | 焊接 | 2014,(4):27-30 | 国内期刊 | 伊晨晖;常保华;都东;张骅;李艺红. |
113 | On the Constitutive Model of Nitrogen-Containing Austenitic Stainless Steel 316LN at Elevated Temperature | PLOS ONE | 2014,(9):1-9 | SCI | L Zhang,X Feng,X Wang,C Liu |
114 | Research on Attenuation Correction in Nonlinear Ultrasonic Testing for Creep | Journal of Materials Engineering | 2014,(07):50-54 | SCI,EI | YUAN Ke-yi, HAN Zan-dong, CHEN Yi-fang, ZHONG Yue-xian |
115 | Influence of TIG welding parameters on porosity in LD10 aluminum alloy joint | Transactions of the China Welding Institution | 2014,35(4):37-40 | EI | LI Yanjun,KANG Ju,WU Aiping,ZHAO Gang ,GAO Yanjun ,ZOU Guisheng |
116 | Study on the Fabrication Process of 316L Stainless Steel via Electron Beam Selective Melting | Journal of Mechanical Engineering | 2014,50(21):152-158 | EI | GUO Chao, LIN Feng, GE Wenjun |
117 | 辅助气体流场对LASOX法激光切割能力和质量的影响 | 中国机械工程学会焊接学会第十八次全国焊接学术会议论文集——S06切割 | 2014,(6):11-15 | 国内期刊 | 张驰; 温鹏 |
118 | Investigation of Rigid Particle Flow Method in Simulating Free Forging Processes | China Mechanical Engineering | 2014,25(19):2674-2680 | EI | Liu Min,Zhu Ming,Ma Qingxian,Ai Jing |
119 | Influence of the Cr gradient in the transition layer on the creep rupture properties of dissimilar joints | Journal of Tsinghua University(Science and Technology) | 2014,54(06):828-833 | EI | ZHANG Boqi, CAI Zhipeng, LI Kejian, PAN Jiluan |
120 | Investigations on Scan Scale and Other Issues of AFM Measurements for Surface Roughness of Hastelloy C276 | CHINESE JOURNAL OF RARE METALS | 2014,38(2):216-223 | EI | Feng Feng,Qu Timing,Xiao Shaozhu,Zhang Yanyi,Shi Kai,Han Zhenghe |
121 | Development of nuclear power main-pipe manufacturing technology | Forging & Stamping Technology | 2014,39(6):1-8 | EI | Zhang Lei, Feng Xiao, Li Mingquan, Wang Xin, Lin Feng |
122 | Gyroscope bias estimation and compensation by rotation of the inertial measurement unit | Journal of Tsinghua University(Science and Technology) | 2014,54(9):1143-1147 | EI | Wu Zheming, Sun Zhenguo, Zhang Wenzeng, Chen Qiang |
123 | Compression Stiffness of Inflatable Tube Structures Based on Fluid-Structure Interaction Analysis | Journal of Basic Science and Engineering | 2014,22(5):1041-1048 | EI | XU Yuejie, ZENG Pan, LEI Liping, HE Wenbin |
124 | Research on Wire Transfer and Its Stability in Laser Hot Wire Welding Process | Chinese Journal of Lasers | 2014,41(4):109-116 | EI | ZHENG Shiqing,WENPeng,SHAN Jiguo |
125 | Errorcorrectionalgorithmformanipulator ofwallclimbingrobotwithbothends havingmagneticadsorption | J Tsinghua Univ(Sci&Tech) | 2014,54(2):185-190 | EI | LIUJiajun,SUNZhenguo,ZHANG Wenzeng,CHEN Qiang |
126 | Effect of two different TIG welding processes on mechanical properties of LD10 aluminum alloy joint | Transactions of the China Welding Institution | 2014,35(3):109-112 | EI | KANG Ju,LIYanjun,WU Aiping,ZHAO Gang,GAO Yanjun,ZOUGuisheng |
127 | Developments and prospects of friction behavior during forging process | Forging & Stamping Technology | 2014,39(06):9-19 | EI | Li Weiqi,Ma Qingxian |
128 | Efficient weld bead shaping method for a wall-climbing robot | Journal of Tsinghua University(Science and Technology) | 2014,54(9):1127-1130 | EI | CUI Zongwei;SUN Zhenguo;ZHANG Wenzeng;CHEN Qiang |
129 | Experimental Tests of Investment Casting Air Jet Cooling Process | FOUNDRY | 2014,63(06):567-570 | 国内期刊 | SHEN Chen, LV Zhi-gang |
130 | Dynamic stability analysis of soft-switching resonant process and optimization of PWM control waveform | Transactions of the China Welding Institution | 2014,35(8):5-8 | EI | Zhu, Zhiming;Yang, Zhongyu;Xia, Zhuliang;Tang, Yingying |
131 | Characteristics of microstructures in laser spot welds of a sintered NdFeB permanent magnet for different welding modes | Journal of Tsinghua University(Science and Technology) | 2014,54(09):1138-1142 | EI | Chang, Baohua;Yi, Chenhui;Du, Dong;Zhang, Hua;Li, Yihong |
132 | Effect of Aging treatment on Reverse Phase Transformation Temperature of TiNi Alloy Laser Weld Metal | Materials Science and Technology | 2014,22(01):19-23 | SCI,EI | YANG Chenggong, SHAN Jiguo, REN Jialie |
133 | Development Status of Investment Casting Industry in the World—Review of International Seminar on Investment Casting Tokyo 2013 | Special Casting & Nonferrous Alloys | 2014,34(01):70-73 | EI | LV Zhigang |
134 | Modeling and control of the nonlinear joints system of mobile repair welding robot | Transactions of the China Welding Institution | 2014,35(08):48-52 | EI | Liu, Jiajun;Sun, Zhenguo;Zhang, Wenzeng;Chen, Qiang |
135 | Fabrication of Bi-2212 thin film on silver substrate by chemical solution method | Chinese Journal of Rare Metals | 2014,38(5):749-754 | EI | Deng, Shutong;Qu, Timing;Lin, Guan;Han, Zhenghe |
136 | Flatness control analysis of chamfer on backup rolls | Forging & Stamping Technology | 2014,39(3):127-131 | EI | Zhu Xianbin Yuan Chaolong; Cai Wanhua |
137 | Correlation between plasma spectral characteristic and porosity during laser deep penetration welding of 6061 aluminum alloy | Transactions of the China Welding Institution | 2015,36(07):72-76 | EI | Li, Kun;Wang, Wei;Shan, Jiguo;Wang, Xuyou |
138 | A combined rotational mold for manufacturing a functional liver system | JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS | 2015,30(4):436-451 | SCI,EI | Wang, Xiaohong; Huang, Yuanwen; Liu, Chang; |
139 | A novel folding blade of wind turbine rotor for effective power control | ENERGY CONVERSION AND MANAGEMENT | 2015,101:52-65 | SCI,EI | Xie, Wei; Zeng, Pan; Lei, Liping |
140 | A parallel slicing algorithm bbased on OpenMP for additive manufacturing | Journal of Computer-Aided Design and Computer Graphi | 2015,27(4):747-753 | 国内期刊 | Ma, Xulong; Lin, Feng |
141 | Comparison of fatigue crack propagation behavior of friction stir welded and metal inert-gas welded A6N01 joints | Transactions of the China Welding Institution | 2015,36(9):9-12 | EI | Dai, Qilei;Meng, Lichun;Liang, Zhifang;Wu, Jianjun;Shi, Qingyu |
142 | Annealing-induced highly-conductive and stable Cu–organic composite nanoparticles with hierarchical structures | Journal of Alloys & Compounds | 2015,636(2):1-7 | SCI,EI | YujieLi;DiLi;ChangguangLi;HongliangWang;DaozhiShen;LeiLiu;GuishengZou |
143 | Radial upset-extruding die design and stress analysis on branch pipe of nuclear power AP1000 main-pipe | Forging and Stamping Technology | 2015,40(10):96-105 | EI | Wang Xin, Zhang Lei, Feng Xiao, Lin Feng, Wang Wenjie, Pan Jiluan |
144 | Application of 3D Biomimetic Models in Drug Delivery and Regenerative Medicine | CURRENT PHARMACEUTICAL DESIGN | 2015,21(12):1618-1626 | 国内期刊 | Xu, Yufan; Wang, Xiaohong ; |
145 | Bonding and high-temperature reliability of NiFeMo alloy/n-type PbTe joints for thermoelectric module applications | Journal of Materials Science | 2015,50(7):2700-2708 | SCI,EI | Haiyang Xia,Fivos Drymiotis,Cheng-Lung Chen,Aiping Wu,Yang-Yuan Chen,G. Jeffrey Snyder |
146 | Controlled Release of Growth Factors for Regenerative Medicine | CURRENT PHARMACEUTICAL DESIGN | 2015,21(12):1-6 | SCI | Liu, Libiao; Zhou, Xinwei; Xu, Yufan; Zhang, Weiming; Wang, Xiaohong |
147 | Deformation and recrystallization of single crystal nickel-based superalloys during investment casting | Journal of Materials Processing Technology | 2015,217:1-12 | SCI,EI | Li, Zhonglin; Xiong, Jichun ; Xu, Qingyan; Li, Jiarong ; Liu, Baicheng |
148 | Determination of local constitutive behavior and simulation on tensile test of 2219-T87 aluminum alloy GTAW joints | Transactions of Nonferrous Metals Society of China | 2015,25(9):3072-3079 | SCI,EI | LI Yan-Jun;LI Quan;WU Ai-Ping;MA Ning-Xu;GQ Wang |
149 | Fluid and cell behaviors along a 3D printed alginate/gelatin/fibrin channel | BIOTECHNOLOGY AND BIOENGINEERING | 2015,112(8):1683-1695 | SCI,EI | Xu, Yufan; Wang, Xiaohong; |
150 | Formation quality optimization of laser hot wire cladding for repairing martensite precipitation hardening stainless steel | Optics & Laser Technology | 2015,65:180-188 | SCI,EI | Wen, Peng; Zhenhua Feng; Shiqing Zheng |
151 | Fracture behavior of double-pass TIG welded 2219-T8 aluminum alloy joints under transverse tensile test | Transactions of Nonferrous Metals Society of China | 2015,25(6):1794-1803 | SCI,EI | LI Quan;WU Ai-Ping;Y Zhao;GQ Wang;DY Yan |
152 | Influence of temperature cycles on the microstructures and mechanical properties of the partially melted zone in the fusion welded joints of 2219 aluminum alloy | Materials Science & Engineering A | 2015,623(623):38-48 | SCI,EI | Q Li,A Wu;Y Li;G Wang;D Yan |
153 | Interface and properties of the friction stir welded joints of titanium alloy Ti6Al4V with aluminum alloy 6061 | Materials & Design | 2015,71(6):85-92 | SCI,EI | A Wu;Z Song;K Nakata;J Liao; L Zhou |
154 | Key technologies and automation system for large-scale aerospace component welding | Advances in Intelligent Systems and Computing | 2015:581-594 | SCI,EI | Zou, Yirong; Chang, Baohua; Wang, Li; Pan, Jiluan; Du, Dong |
155 | Microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser micro cladding deposition | Rare Metals | 2015,34(7):445-451 | SCI,EI | Yao, Bo; Ma, Xu-Long; Lin, Feng; Ge, Wen-Jun |
156 | Thermal transient phase transformation and deformation behavior of NiTi shape memory alloy | Forging & Stamping Technology | 2015,40(7):120-126 | EI | Du Hongfei, Xiao Yao, Zeng Pan, Lei Liping, Hei Meng |
157 | Ultrasonic inspection for creep in P91 steel weldments based on non-creep feature space projection | Journal of Tsinghua University | 2015,55(03):310-315 | EI | Yuan, Keyi;Han, Zandong;Zhong, Yuexian |
158 | Research on visual weld trace detection method based on invariant moment features | Advances in Intelligent Systems and Computing | 2015,42(2):239-248 | SCI,EI | Zeng, Jin-Le; Zou, Yi-Rong; Du, Dong; Chang, Bao-Hua; Pan, Ji-Luan |
159 | STL流水线并行分层算法 | 第16届全国特种加工学术会议论文集(下) | 2015:5-5 | 国内期刊 | 马旭龙;林峰 |
160 | STRENGTH AND TOUGHNESS OF T250 MARAGING STEEL JOINT HYBRID-TREATED WITH LASER WELDING AND AGING | Acta Metallurgica Sinica | 2015,51(08):904-912 | SCI,EI | Kun LI, Jiguo SHAN, Chunxu WANG, Zhiling TIAN |
161 | The effect of ultrasonic processing on solidification microstructure and heat transfer in stainless steel melt | ULTRASONICS SONOCHEMISTRY | 2015,27(1):307-315 | SCI | Zhang, Xiaopeng; Kang, Jinwu; Wang, Shuo; Ma, Jiyu; Huang, Tianyou |
162 | The influence of pure Al and hypoeutectic Al-Si alloy base materials on the cell structures of aluminum foams produced by gas injection foaming process | Journal of Functional Materials | 2015,46(19):19041-19045 | EI | Zhou, Yutong ; Li, Yanxiang ; Yuan, Jianyu |
163 | Thermal analysis of Cu-organic composite nanoparticles and fabrication of highly conductive copper films. | Journal of Alloys and Compounds | 2015,649(7):1156-1163 | SCI,EI | Yujie Li, Yao Huo, Changguang Li, Songling Xing, Lei Liu, Guisheng Zou |
164 | Wind tunnel experiments for innovative pitch regulated blade of horizontal axis wind turbine | ENERGY | 2015,91:1070-1080 | SCI,EI | Xie, Wei; Zeng, Pan; Lei, Liping |
165 | Study on high speed laser-MIG hybrid welding for large gap joint of stainless steel sheet | Transactions of the China Welding Institution | 2015,36(10):109-112 | EI | Zhang, Zhou;Shan, Jiguo;Wu, Aiping;Ren, Jialie |
166 | Influence of low atmospheric pressures on the arc characteristics of self-shielded flux-core wire | Journal of Tsinghua University | 2015,55(7):734-738 | EI | Zhu, Zhiming;Fan, Kaiguo;Liu, Han;Wang, Yongdong |
167 | Effects of femtosecond laser parameters on hole drilling of silica glass | Chinese Journal of Lasers | 2015,55(4): 1-6 | EI | Xing, Songling;Liu, Lei;Zou, Guisheng;Zhang, Xueqian;Bai, Hailin;Zhou, Y.N. |
168 | Microstructures of Ti6Al4V components synthesized via electron beam selective melting | Rare Metal Materials and Engineering | 2015,44(12):3215-3218 | SCI,EI | Ge, Wenjun;Guo, Chao;Lin, Feng |
169 | Effect of travel speed on the root-defects and mechanical properties of friction stir welded A6082 alloy joint | Transactions of the China Welding Institution | 2015,36(8):27-30 | EI | Dai, Qilei;Wang, Xiuyi;Hou, Zhenguo;Cao, Xiong;Shi, Qingyu |
170 | 焊前阳极氧化处理对A6061/CFRP激光连接接头剪切强度的影响 | 第二十次全国焊接学术会议论文集 | 2015 | 国内期刊 | 张洲; 张婧; 谭向虎; 单际国; 吴爱萍 |
171 | A Method for Continuous Measurement of Critical Current of HTS Tapes Using Magnetic Circuits | RARE METAL MATERIALS AND ENGINEERING | 2015,44(2):429-432 | SCI,EI | Zou Shengnan, Gu Chen, Qu Timing, Han Zhenghe |
172 | Seam tracking based on dynamic trajectory planning for a mobile welding robot | Transactions of the China Welding Institution | 2015,36(10):25-28 | EI | Hong, Yuxiang;Du, Dong;Pan, Jiluan;Li, Xiangwen |
173 | 基于蒙特卡洛法的箱型钢结构焊接机器人工作空间分析 | 第二十次全国焊接学术会议论文集 | 2015 | 国内期刊 | 朱志明;马国锐;郭吉昌;刘晗 |
174 | Plane-constraint based hand-eye calibration method for underactuated wall-climbing robot | Robot | 2015,37(03):271-276 | EI | Liu, Jiajun;Sun, Zhenguo;Zhang, Wenzeng;Chen, Qiang |
175 | Motion state detection technique for wall-climbing robot base on two degree of freedom universal wheel mechanism | Journal of Shanghai Jiaotong University | 2015,49(3):379-382 | EI | Zheng, Jun;Qiu, Qiang;Li, Peng;Pan, Ji-Luan |
176 | 基于线性稳压的变极性焊接电源拓扑及其控制策略 | 第二十次全国焊接学术会议论文集 | 2015 | 国内期刊 | 杨中宇;朱志明;汤莹莹 |
177 | Control of resistance heat and optimization of wire feeding parameters in laser hot wire welding | Transactions of the China Welding Institution | 2015,36(9):17-20 | EI | Wen, Peng;Zheng, Shiqing;Shan, Jiguo;Feng, Zhenhua |
178 | Experimental research on real-time ultrasonic detection of pure metal creep | Journal of Tsinghua University | 2015,55(07):739-743 | EI | Yuan, Keyi;Han, Zandong;Zhong, Yuexian;Chen, Yifang |
179 | Controllable Growth and Transfer of Carbon Nanotubes on Localized Pattern | Semiconductor Technology | 2015,40(2):123-128 | 国内期刊 | Zhang Lei, Wang Junjie, Gong Qianming, Wu Cinan, Liu Zewen |
180 | Study on laser surfi-sculpt of GMW2 autobody sheet steel for carbon fiber reinforced polymer/steel dissimilar joint | Chinese Journal of Lasers | 2015,42(03):54-60 | EI | Tan, Xianghu;Shan, Jiguo;Tang, Lei;Cheng, Wuzhu |
181 | Microstructure evolution of internal crack healing in a low-carbon steel at elevated temperatures | Journal of Tsinghua University | 2015,55(03):304-309 | EI | Xin, Ruishan;Ma, Qingxian;Shan, Zhongde |
182 | Influence of element segregation at grain boundary of heat affected zone on low-cycle fatigue property of weldment | Journal of Mechanical Engineering | 2015,51(14):78-85 | EI | Tang, Zhinan;Cai, Zhipeng;Wu, Jiandong |
183 | Decoupled analysis of resonant process and parameters design for soft-switching inverter | Transactions of the China Welding Institution | 2015,36(3):5-8 | EI | Zhu, Zhiming;Yang, Zhongyu;Tang, Yingying;Xia, Zhuliang |
184 | Measurement of Temperature Field in Titanium Alloy Investment Casting Process under Production Environment | Special Casting & Nonferrous Alloys | 2015,35(01):63-65 | 国内期刊 | Zhang He, LüZhigang, Guo Xin, Ran Xing, Wu Guangpeng |
185 | Bending stiffness of inflatable tubes with external constraints | Journal of Tsinghua University | 2015,55(3):298-303 | EI | Xu, Yuejie;Zeng, Pan;Lei, Liping |
186 | Effect of Precipitate Evolution on the Pitting Corrosion of Friction Stir Welded Joints of an Al-Cu Alloy | Corrosion | 2016,72(6):719-731 | SCI,EI | Ku Kang, Zhicao Feng, G.S. Frankel, Jichao Li, Guisheng Zou, Aiping Wu |
187 | Numerical simulations of welding residual stresses in VPTIG-welded joints of the 2219 aluminum alloy | Journal of Tsinghua University | 2016,56(10):1037-1041 | EI | Li, Yanjun;Wu, Aiping;Liu, Debo;Zhao, Haiyan;Zhao, Yue;Wang, Guoqing |
188 | A Precise Visual Method for Narrow Butt Detection in Specular Reflection Workpiece Welding | SENSORS | 2016,16(9):1480-1480 | SCI,EI | Zeng, Jinle; Chang, Baohua; Du, Dong; Hong, Yuxiang; Chang, Shuhe; Zou, Yirong |
189 | A visual weld edge recognition method based on light and shadow feature construction using directional lighting | JOURNAL OF MANUFACTURING PROCESSES | 2016,24 :19-30 | SCI,EI | Zeng, Jinle; Chang, Baohua; Du, Dong; Hong, Yuxiang; Zou, Yirong; Chang, Shuhe |
190 | An Alternative Frictional Boundary Condition for Computational Fluid Dynamics Simulation of Friction Stir Welding | Journal of Materials Engineering and Performance | 2016,25(9):4016-4023 | SCI,EI | Chen, Gaoqiang ; Feng, Zhili ; Zhu, Yucan ; Shi, Qingyu |
191 | Anomalous α-Mg Dendrite Growth During Directional Solidification of a Mg-Zn Alloy | Metallurgical and Materials Transactions A | 2016,47(9):4368-4373 | SCI,EI | Shuai, Sansan ; Guo, Enyu ; Wang, Mingyue ; Callaghan, Mark D. ; Jing, Tao ; Zheng, Qiwei ; Lee, Peter D. |
192 | Constitutive modeling for investigating the effects of friction on rheological behavior during hot deformation | Materials and Design | 2016,97 :64-72 | SCI,EI | Li, W.Q.; Ma, Q.X. |
193 | Cu2ZnSnS4ceramic target | Ceramics International | 2016,42(8):9630-9635 | SCI,EI | Sun, Rujun ; Zhao, Ming ; Zhuang, Daming ; Li, Xiaolong ; Gong, Qianming ; Ouyang, Liangqi ; Guo, Li ; Cao, Mingjie |
194 | Design of novel multidirectional magnetized permanent magnetic adsorption device for wall-climbing robots | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | 2016,17(7):871-878 | SCI | Yan, Chenfei; Sun, Zhenguo; Zhang, Wenzeng; Chen, Qiang |
195 | Detection system for location of fuel pebbles transported in pipes in a pebble-bed reactor based on vibration signal processing | Nuclear Engineering and Design | 2016,305 :156-167 | SCI,EI | Liu, Hongbing ; Du, Dong ; Huang, An ; Chang, Baohua ; Han, Zandong ; He, Ayada |
196 | Discrete modeling and deadbeat control of inverter welding power supply | Transactions of the China Welding Institution | 2016,37(6):19-22 | EI | Zhu, Zhiming ; Yang, Zhongyu ; Tang, Yingying ; Xia, Zhuliang |
197 | Dynamic characteristics and enhanced performance of a novel wind turbine rotor analyzed via experiments and numerical simulation | INTERNATIONAL JOURNAL OF ENERGY RESEARCH | 2016,40(13):1773-1787 | SCI,EI | Lu, Hongya; Zeng, Pan; Lei, Liping |
198 | Effect of anodizing pretreatment on laser joining CFRP to aluminum alloy A6061 | International Journal of Adhesion and Adhesives | 2016,70 :142-151 | SCI,EI | Zhang, Zhou ; Shan, Ji-Guo ; Tan, Xiang-Hu ; Zhang, Jing |
199 | Effect of post-weld heat treatments on strength and toughness behavior of T-250 maraging steel welded by laser beam | Materials Science and Engineering A | 2016,663 :157-165 | SCI,EI | Li, Kun; Shan, Jiguo; Wang, Chunxu ; Tian, Zhiling |
200 | Fast Parallel Algorithm for Slicing STL Based on Pipeline | CHINESE JOURNAL OF MECHANICAL ENGINEERING | 2016,29(3):549-555 | EI | Ma Xulong; Lin Feng; Yao Bo |
201 | Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of [Formula presented] alloys | Acta Materialia | 2016,118 :260-269 | SCI,EI | Shuai, Sansan ; Guo, Enyu ; Phillion, A.B. ; Callaghan, Mark D. ; Jing, Tao ; Lee, Peter D. |
202 | Flexible route to fabricate excellent adsorbents for Vitamin B12by specially designed oil-drop process | Micro and Nano Letters | 2016,11(4):188-191 | SCI,EI | Guo, Bingzhi ; Huang, Yilun ; Gong, Qianming ; Wang, Junjie ; Zhuang, Daming ; Liang, Ji |
203 | Interfacial reaction and mechanical properties for Cu/Sn/Ag system low temperature transient liquid phase bonding | Journal of Materials Science | 2016,27(5):4839-4848 | SCI,EI | Shao, Huakai ; Wu, Aiping ; Bao, Yudian ; Zhao, Yue ; Zou, Guisheng |
204 | Joining Mg alloys with Zn interlayer by novel ultrasonic-assisted transient liquid phase bonding method in air | Materials Letters | 2016,166 :219-222 | SCI,EI | Lai, Zhiwei ; Chen, Xiaoguang ; Pan, Chuan ; Xie, Ruishan ; Liu, Lei; Zou, Guisheng |
205 | Microstructure and mechanical properties of a refractory HfNbTiVSi0.5high-entropy alloy composite | Materials Letters | 2016,174 :82-85 | SCI,EI | Zhang, Yan ; Liu, Yuan ; Li, Yanxiang ; Chen, Xiang ; Zhang, Huawei |
206 | Microstructure and mechanical properties of internal crack healing in a low carbon steel | Materials Science and Engineering A | 2016,662 :65-71 | SCI,EI | Xin, Ruishan ; Ma, Qingxian ; Li, Weiqi |
207 | Microstructure, Mechanical Properties and Mechanism of Ultrasound-Assisted Rapid Transient Liquid Phase Bonding of Magnesium Alloy in Air | Materials and Design | 2016,91 :19-27 | SCI,EI | Ruishan Xie, Xiaoguang Chen, Zhiwei Lai, Lei Liu, Guisheng Zou, Jiuchun Yan, WenxianWang |
208 | Simulation and experimental studies of induction heating during the partial upset-extrusion of a nuclear main pipe | ADVANCES IN MECHANICAL ENGINEERING | 2016,8(11):1-14 | SCI | Mao, Xinyu; Zhang, Lei; Wang, Xin; Feng, Xiao; Lin, Feng |
209 | Simulation of material plastic flow driven by non-uniform friction force during friction stir welding and related defect prediction | Materials and Design | 2016,108 :400-410 | SCI,EI | Zhu, Yucan ; Chen, Gaoqiang ; Chen, Qilong ; Zhang, Gong ; Shi, Qingyu |
210 | Synthesis of a bimodal porous Cu with nanopores on the inner surface of Gasar pores | Applied Surface Science | 2016,360 :148-156 | SCI,EI | Du, Ming ; Zhang, Hua-Wei ; Li, Yan-Xiang ; Liu, Yuan ; Chen, Xiang ; He, Yun |
211 | Analysis of keyhole-type pore suppressing in fiber laser welded TC4 titanium alloy with beam weaving | Transactions of the China Welding Institution | 2016,37(11):43-46 | EI | LI Kun,WANG Wei,SHAN Jiguo,WANG Xuyou,CHEN Wuzhu1 |
212 | The material-dependence of plasticity in metallic glasses | Materials and Design | 2016,96 :189-194 | SCI,EI | Yang, G.N. ; Shao, Y. ; Yao, K.F. |
213 | The role of copper in microstructures and mechanical properties of laser-welded Fe-19Ni-3Mo-1.5Ti maraging steel joint | Materials Science and Engineering A | 2016,681 :41-49 | SCI,EI | Li, Kun ; Shan, Jiguo ; Wang, Chunxu; Tian, Zhiling |
214 | Three-dimensional α-Mg dendritic morphology and branching structure transition in Mg-Zn alloys | Materials Characterization | 2016,118 :304-308 | SCI,EI | Shuai, Sansan ; Guo, Enyu ; Zheng, Qiwei ; Wang, Mingyue ; Jing, Tao ; Fu, Yanan |
215 | Ultrasonic -assisted brazing of Al-Ti dissimilar alloy by filler metal with large semi-solid temperature range | Materials and Design | 2016,95 :296-305 | SCI,EI | Xiaoguang Chen, Ruishan Xie, Zhiwei Lai, Lei Liu, Guisheng Zou, Jiuchun Yan |
216 | Optimization Design of the Unit Combined Permanent Magnetic Adsorption Device with Variable Magnetization Directions | Transactions of China Electrotechnical Society | 2016,31(3):188-194 | EI | Yan Chenfei,Sun Zhenguo, Zhang Wenzeng, Chen Qiang |
217 | Research on Rotatory Deformation Uniformity and Compaction Effect of Super-heavy Hollow Steel Ingot | Journal of Mechanical Engineering | 2016,52(08):90-96 | EI | LIU Min,MA Qingxian ,LIU Gongmei |
218 | Ultrasonic frequency pulse power supply and its parallel coupling with welding power supply | Transactions of the China Welding Institution | 2016,37(8):13-16 | EI | ZHU Zhiming,TANG Yingying,JI Shengru, YANGZhongyu |
219 | Hot Deformation Behavior and Processing Map of Nickel N6 from Extrusion Billet | Journal of Netshape Forming Engineering | 2016,8(3):1-6 | 国内期刊 | MO Ge,ZENG Pan |
220 | Design and Research for the Large-Caliber Low-Speed Straight-Flow Wind Tunnel Test Platform | Mechanical Research & Application | 2016,29(3):86-89 | 国内期刊 | CAO Lan, ZENG Pan, LEI Li-ping |
221 | Motion planning method for complex three dimensional path welding | Journal of Tsinghua University | 2016,56(10):1031-1036 | EI | J Zeng, DU Dong, B Chang, Y Hong, S Chang |
222 | High efficient gas shielded multi-arc welding technology | Electric Welding Machine | 2016,46(11):1-20 | 国内期刊 | TANG Yingying, ZHU Zhiming, YANG Zhongyu, YU Yingfei |
223 | Three-dimensional object recognition and posture calculations based on the whitening transformation and curvature characteristics | Journal of Tsinghua University(Science and Technology) | 2016,56(10):1025-1030 | EI | ZHENG Jun, WEI Haiyong |
224 | Measurement of the Stokes vector based on a twisted nematic liquid crystal | Journal of Tsinghua University(Science and Technology) | 2016,56(2):206-210 | EI | ZHENG Jun, DING Qiushi |
225 | Study on P91 Alloy Ductile Fracture Behavior Based on Compressing Experiment | China Mechanical Engineering | 2016,27(16):2254-2258 | EI | Liu Yutong,Yuan Chaolong,Wu Rendong ,Jiao Wei,Qiang Hao |
226 | Influence of Processing Parameters on the Microstructure of TC4 Titanium Alloy by Laser Micro Cladding Deposition Manufacturing | Rare Metal Materials and Engineering | 2016,45(02):439-444 | SCI,EI | Yao Bo;Lin Feng;Ma Xulong; |
227 | Wall Climbing Robot Based on Two-end Adsorption for Weld Seam Amending | Robot | 2016,38(1):122-128 | EI | CUI Zongwei, SUN Zhenguo, CHEN Qiang, ZHANG Wenzeng; |
228 | 浅议工程材料课程教学与大学生自主学习 | 中国现代教育装备 | 2016,663(59):63-63 | 国内期刊 | 巩前明; 姚可夫; 邵洋;朱宏伟; 刘源; 张华堂; 吴运新; 张弓;朱张校 |
229 | Dynamics characteristics of collisions between fuel elements transported in tandeminapebble Gbed reactor system | J Tsinghua Univ(Sci&Tech) | 2016,56(09):1003-1008 | EI | LIU Hongbing,HUANG An,CHANG Baohua,WANG Li,DU Dong |
230 | Mechanism and Influence of Re-dissolution of Zirconium Diacetate-Yttria Shell for Titanium Investment Casting | Rare Metal Materials & Engineering | 2016,45(02):303-308 | SCI,EI | Guo Xin, Lü Zhigang, Li Peijie |
231 | The application of pre-stressing wire-wound "orthogonal pre-load frame" to heavy multi-ram forging hydraulic press | Forging equipment and manufacturing technology | 2016,51(1):7-13 | EI | WANG Wenjie, LIN Feng, ZHANG Lei, WANG Xin |
232 | Preparation of nanoparticle and nanowire mixed pastes and their low temperature sintering | Journal of Alloys and Compounds | 2017,690 :86-94 | SCI,EI | Wei Guo, Hongqiang Zhang, Xiaoying Zhang, Lei Liu, Peng Peng, Guisheng Zou |
233 | Rapid Ag/Sn/Ag transient liquid phase bonding for high-temperature power devices packaging by the assistance of ultrasound | Ultrasonics Sonochemistry | 2017,37 :561-570 | SCI | Shao H, Wu A, Bao Y, Zhao Y, Liu L, Zou G. |
234 | A Vision-Aided 3D Path Teaching Method before Narrow Butt Joint Welding | SENSORS | 2017,17(5):1099-1099 | SCI,EI | Zeng, Jinle; Chang, Baohua; Du, Dong; Peng, Guodong; Chang, Shuhe; Hong, Yuxiang; Wang, Li; Shan, Jiguo |
235 | Analytical approach for describing the collapse of surface asperities under compressive stress during rapid solid state bonding | Scripta Materialia | 2017,128 :41-44 | SCI,EI | Chen, Gaoqiang ; Feng, Zhili ; Chen, Jian ; Liu, Lei ; Li, Han ; Liu, Qu ; Zhang, Shuai ; Cao, Xiong ; Zhang, Gong ; Shi, Qingyu |
236 | Characterization of the morphology of primary silicon particles using synchrotron X-ray tomography | Materials Characterization | 2017,123 :354-359 | SCI,EI | Wang, J. ; Guo, Z. ; Xiong, S.M. |
237 | Study on shear strength and fracture behavior of Cu-Sn system low-temperature TLP bonded joint | Transactions of The China Welding Institution | 2017,38(3):13-16 | EI | SHAO Huakai, WU Aiping, ZOU Guisheng |
238 | Effect of laser scanning and powder addition on microstructure and mechanical properties for hot-wire-feed laser additive manufacturing | Journal of Laser Applications | 2017,29(2): 1-7 | SCI,EI | Wen P;Wang G;Chen Y |
239 | Effects of the borideson the mechanical properties of TLPB repaired Inconel 738 superalloy | Metallurgical and Materials Transactions A | 2017,48A(10):4622-4631 | SCI,EI | J. Wei, Y. Ye, Z. Sun, G. Zou, H. Bai, A. Wu, L. Liu |
240 | Effects of weld reinforcement on tensile behavior and mechanical properties of 2219-T87 aluminum alloy TIG welded joints | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2017,27(1):10-16 | SCI,EI | GQ Wang;LI Quan; LI Yan-Jun;WU Ai-Ping;MA Nin-Xu |
241 | Effects of welding condition on weld shape and distortion in electron beam welded Ti2AlNb alloy joints | Materials and Design | 2017,114 :226-233 | SCI,EI | Li, Yanjun ; Zhao, Yue ; Li, Quan ; Wu, Aiping ; Zhu, Ruican ; Wang, Guoqing |
242 | Elimination of pores in Ag-Sn TLP bonds by the introduction of dissimilar intennetallic phases | Journal of Materials Science | 2017,52(6):3508-3519 | SCI,EI | H Shao;A Wu;Y Bao;Y Zhao |
243 | Improved mechanical properties in friction stir processed carbon Fiber reinforced aluminum composites | Journal of Tsinghua University(Science and Technology) | 2017,57(8):792-797 | EI | SHIQingyu, CAOXiong, LIJiyuan, CHENGaoqiang, LIUQu |
244 | Generation of droplets via oscillations of a tapered capillary tube filled with low-viscosity liquids | PHYSICS OF FLUIDS | 2017,29(6):4-4 | SCI,EI | Mao, Xinyu; Zhang, Lei; Zhao, Zhenhao; Lin, Feng |
245 | Graphene-Based Functional Architectures Sheets Regulation and Macrostructure Construction toward Actuators and Power Generators | Acc. Chem. Res. | 2017,50(7):1663-1671 | SCI | Huhu Cheng, Yaxin Huang, Gaoquan Shi, Lan Jian, Liangti Qu |
246 | Graphene-Based Functional Architectures: Sheets Regulation and Macrostructure Construction toward Actuators and Power Generators | ACCOUNTS OF CHEMICAL RESEARCH | 2017,50(7):1663-1663 | SCI | Cheng, Huhu; Huang, Yaxin; Shi, Gaoquan; Jiang, Lan; Qu, Liangti |
247 | Graphene-based smart materials | NATURE REVIEWS MATERIALS | 2017,2 :17406-1-17406-13 | SCI,EI | Xiaowen Yu, Huhu Cheng, Miao Zhang, Yang Zhao, Liangti Qu, Gaoquan Shi |
248 | Highly Efficient Moisture-Triggered Nanogenerator Based on Graphene Quantum Dots | ACS Appl. Mater. Interfaces | 2017,9(44):38170-38175 | SCI,EI | Yaxin Huang, Huhu Cheng Gaoquan Shi, Liangti Qu |
249 | Improvement of the laser joining of CFRP and aluminum via laser pre-treatment | International Journal of Advanced Manufacturing Technology | 2017,90 :3465-3472 | SCI,EI | Zhang, Zhou ; Shan, Jiguo ; Tan, Xianghu ; Zhang, Jing |
250 | In Situ Observation of Crystallization of Methylammonium Lead Iodide Perovskite from Microdroplets. | SMALL | 2017,13(26):1604125-1-1604125-7 | SCI,EI | Li, Yahui; Zhao, Zhenhao; Lin, Feng; Cao, Xiaobing; Cui, Xian; Wei, Jinquan |
251 | Interactions at the planar Ag3Sn/liquid Sn interface under ultrasonic irradiation | Ultrasonics Sonochemistry | 2017,39 :758-764 | SCI | Huakai Shao, Aiping Wu, Yudian Bao, Yue Zhao, Lei Liu, Guisheng Zou |
252 | Interfacial Structure and Formation Mechanism of Ultrasonic-assisted Brazed Joint of SiC Ceramics with Al12Si Filler Metals in Air | Journal of Materials Science & Technology | 2017,33(5):492-498 | SCI,EI | Xiaoguang Chen, Ruishan Xie, Zhiwei Lai, Lei Liu, Jiuchun Yan, Guisheng Zou |
253 | Mechanism of Ag3Sn grain growth in Ag/Sn transient liquid plase soldering | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2017,27(3):722-732 | SCI,EI | Shao Huakai,Wu Aiping,Bao Yudian, Zhao Yue, Zou Guisheng |
254 | Microstructure and mechanical properties of refractory HfMo0.5NbTiV0.5Sixhigh-entropy composites | Journal of Alloys and Compounds | 2017,694:869-876 | SCI,EI | Liu, Yuan ; Zhang, Yan ; Zhang, Heng ; Wang, Naijuan ; Chen, Xiang ; Zhang, Huawei ; Li, Yanxiang |
255 | Microstructure characterization and mechanical behavior for Ag3Sn joint produced by foil-based TLP bonding in air atmosphere | Materials Science and Engineering: A | 2017,680:221-231 | SCI,EI | Shao H, Wu A, Bao Y, Zhao Y, Zou G |
256 | Multi-physics modeling of single/multiple-track defect mechanisms in electron beam selective melting | ACTA MATERIALIA | 2017,134:324-333 | SCI,EI | Yan, Wentao; Ge, Wenjun; Qian, Ya; Lin, Stephen; Zhou, Bin; Liu, Wing Kam; Lin, Feng; Wagner, Gregory J. |
257 | Numerical Study on AC Loss Characteristics of REBCO Armature Windings in a 15-kW Class Fully HTS Generator | IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY | 2017,27(4):1-6 | SCI,EI | Li, Yufan; Feng, Feng; Li, Yi; Song, Peng; Zou, Shengnan; Wu, Mingshuo; Gu, Chen; Zeng, Pan; Qu, Timing |
258 | Pneumatic transportation pattern of fuel pebbles in a pebble-bed reactor | Annals of Nuclear Energy | 2017,99 :434-443 | SCI,EI | Liu, Hongbing ; Du, Dong ; Han, Zandong ; Chang, Baohua ; Pan, Jiluan ; Shen, Peng |
259 | Restoration of impact properties of internal crack healing in a low carbon steel | Materials Science and Engineering A | 2017,682 :433-440 | SCI,EI | Xin, Ruishan ; Ma, Qingxian ; Guo, Dongdong ; Li, Weiqi |
260 | Segregation in fusion weld of 2219 aluminum alloy and its influence on mechanical properties of weld | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2017,27(2):258-271 | SCI,EI | Li Quan, Wu Ai-ping,Li Yan-jun; Wang Guo-qing; Qi Bo-jin; Yan Dong-yang;Xiong Lin-yu |
261 | Self‐Healing Graphene Oxide Based Functional Architectures Triggered by Moisture | Adv. Funct. Mater. | 2017,27:1703096- | SCI,EI | Huhu Cheng,Yaxin Huang, Qilong Cheng, Gaoquan Shi, Lan Jiang, Liangti Qu |
262 | Cu/Ag system low-temperature transient liquid phase bonding with Sn-Ag mixed powders | Transactions of The China Welding Institution | 2017,38(10):80-84 | EI | SHAO Huakai, WU Aiping, BAO Yudian |
263 | Synthesis of silver nanoparticles using large area arc discharge and its application in electronic packaging | Journal of Materials Science | 2017,52(6):3375-3387 | SCI,EI | Hongqiang Zhang, Guisheng Zou, Lei Liu, Hao Tong, Yong Li, Hailin, Bai, Aiping Wu |
264 | Influence of Welding Parameters on Porosity in Welding of TC4 Titanium Alloy in Two Positions | Aerospace Materials & Technology | 2017,47(6):39-42 | 国内期刊 | LI Haigang,YUAN Zhang,CHENG Hao, PU Haitao,CHANG Baohua, DU Dong,SHAN Jiguo |
265 | Numerical Simulation for Full-Penetration Electron Beam Welding of Ti2AlNb Alloy | RARE METAL MATERIALS AND ENGINEERING | 2017,46(5):1341- 1345 | SCI,EI | Li Yanjun, Zhao Yue, Wu Aiping, Zhu Ruican, Wang Guoqing |
266 | Wind tunnel testing and improved blade element momentum method for umbrella-type rotor of horizontal axis wind turbine | ENERGY | 2017,119:334-350 | SCI,EI | Xie, Wei; Zeng, Pan; Lei, Liping |
267 | Laser Welding Parameters and Tensile Properties of Partial Penetration Lap Joint for Stainless Train Body | China Mechanical Engineering | 2017,28(11):1355-1361 | EI | WEN Peng, WU Ruifeng, WANG Xiuyi, AN Ji, WANG Xiaolong, ZHANG Yan |
268 | Analysis of breakthrough extrusion pressure for large scale steel pipe | Journal of Plasticity Engineering | 2017,24(1):24-29 | 国内期刊 | WU Dong-wen,WU Ren-dong,YUAN Chao-long,JIAO Wei,QIANG Hao |
269 | Research Advances of Electron Beam Selective Melting Additive Manufacturing Technology | Industrial Technology Innovation | 2017,04(04):6-14 | 国内期刊 | GUO Chao, ZHANG Ping-ping, LIN Feng |
270 | 电子束与激光复合选区熔化系统的开发 | 特种加工技术智能化与精密化——第17届全国特种加工学术会议论文集(摘要) | 2017:1-5 | 国内期刊 | 李宏新;周斌;林峰 |
271 | Influence of peak stress on plastic behavior of NiTi shape memory alloy under cyclic deformation | Journal of Plasticity Engineering | 2017,24(01):145- 151 | 国内期刊 | XIAO Yao, ZENG Pan, LEI Li-ping |
272 | Development and research status of welding visualization technology | Welding & Joining | 2017,(12):4-8 | 国内期刊 | Yu Yingfei, Guo Jichang, Zhu Zhiming |
273 | Research and Application of Visual Sensing Technology Based on Laser Structured Light in Welding Industry | Chinese Journal of Lasers | 2017,44(12):7-16 | EI | J Guo , Z Zhu , Y Yu , B Sun |
274 | 基于距离滤波的厚板多层多道焊特征点识别算法 | 焊接技术 | 2017,46(05):8-12 | 国内期刊 | 欧志辉;孙振国;陈咏华;吴景然; |
275 | Effects of Shot Peening on Fatigue Crack Propagation Behavior of Single Notched H13 Steel Specimens | China Surface Engineering | 2017,30(04):117-126 | EI | WU Ying, LEI Li-ping, ZENG Pan |
276 | Effects of Shot Peening on Fatigue Crack Propagation Behavior of Single Notched H13 Steel Specimens | Forging and Stamping Technology | 2017,42(11):164- 171 | EI | WU Ying, LEI Li-ping, ZENG Pan |
277 | Interdendritic Shrinkage Porosity and Microsegregation of Superalloy K424 in Investment Casting Process | Rare Metal Materials and Engineering | 2017,46(09):2476-2480 | SCI,EI | Ai Houwang, Lv Zhigang, Guo Xin |
278 | Ultrasonic Resonance Measuring for the Thickness of Ceramics Coatings | Nondestructive Testing | 2017,39(03):1-4 | 国内期刊 | LI Yongjie,HAN Zandong |
279 | Oblique-incidence ultrasonic testing for the adhesion quality of ceramic coatings | Journal of Tsinghua University | 2017,57(05):454- 458 | EI | Z Han, LI Yongjie, Y Chen |
280 | Effect of warm surface rolling on fatigue property of H13 steel | Journal of Plasticity Engineering | 2017,24(01):74-78 | 国内期刊 | HE Zhe-long LEI Li-ping ZENG Pan |
281 | Topology of secondary inverter and its control strategy of variable polarity welding power supply for generating stabilized reverse voltage | Transactions of the China Welding Institution | 2017,38(9):23-27 | EI | YANG Zhongyu, ZHU Zhiming, TANG Yingying, XIA Zhuliang |
282 | Power loss and temperature rise model for an IGBT in a variable polarity welding power supply with a reverse voltage stabilizer | Journal of Tsinghua University(Science and Technology) | 2017,57(5):471-475 | EI | YANG Zhongyu, ZHU Zhiming, LIU Bo, TANG Yingying |
283 | D-H model and continuous trajectory planning for orbital welding robot of box-type steel structure | Transactions of the China Welding Institution | 2017,38(12):95-98 | EI | ZHU Zhiming,MA Guorui,LIU Han,LIU Bo |
284 | Kinematics analysis and trajectory planning for a welding robot for girth welding of box-type steel | Journal of Tsinghua University(Science and Technology) | 2017,57(8):785-791 | EI | ZHU Zhiming,GUO Jichang,MA Guorui, LIU Bo |
285 | Effect of current configuration on weld properties and microstructure in synchronised twin-wire pulsed MAG welding | Transactions of Materials and Heat Treatment | 2017,38(04):100-105 | EI | LIANG Yin,PAN Jiluan ZHANG Hua,LIU Pin,WU Yaogang |
286 | Numerical simulation on Y-ring welding residual stress and its effects on loading behavior of propellant tank | The Chinese Journal of Nonferrous Metals | 2017,27(4):701-707 | EI | LI Yanjun,WU Aiping LIU Debo,ZHAO Haiyan ,ZHAO Yue,WANG Guoqing |
287 | Preparation and Characterization of Cu2ZnSnS4 Thin Films and Solar Cells Fabricated from Quaternary Cu-Zn-Sn-S Target | INTERNATIONAL JOURNAL OF PHOTOENERGY | 2013,2013: 1-9 | SCI | M. Xie, D.M. Zhuang, M. Zhao, Z.L. Zhuang, L.Q. Ouyang, X.L. Li, J. Song |
288 | In-situ fabrication of MoSi2/SiC-Mo2C gradient anti-oxidation coating on Mo substrate and the crucial effect of Mo2C barrier layer at high temperature | Appl Surf Sci | 2014,308: 261-268 | SCI,EI | J. Liu, Q. Gong, Y. Shao, D. Zhuang, J. Liang |
289 | The relationships between electronic properties and microstructure of Cu(In,Ga)Se-2 films prepared by sputtering from a quaternary target | Materials Letters | 2014,137: 249-251 | SCI,EI | L. Ouyang, M. Zhao, D. Zhuang, J. Han, L. Guo, X. Li, M. Cao |
290 | Fabrication of Cu2ZnSnS4 thin films using a ceramic quaternary target | Vacuum | 2014,101: 146-150 | SCI,EI | M. Xie, D.M. Zhuang, M. Zhao, B.J. Li, M.J. Cao, J. Song |
291 | Cu(In,Ga)Se-2-based solar cells prepared from Se-containing precursors | Vacuum | 2014,102: 26-30 | SCI,EI | J. Liu, D.M. Zhuang, M.J. Cao, X.L. Li, M. Xie, D.W. Xu |
292 | Fabrication of Se-rich Cu(In1-xGax)Se-2 quaternary ceramic target | Vacuum | 2015,119:15-18 | SCI,EI | X.L. Li, M. Zhao, DM Zhuang, M.J. Cao, L.Q. Ouyang, L Guo, R.J. Sun, Z.D. Gao |
293 | Annealing treatment of Cu(In,Ga)Se-2 absorbers prepared by sputtering a quaternary target for 13.5% conversion efficiency device | Solar Energy | 2015,118:375-383 | SCI,EI | Ouyang LQ , Zhao M , Zhuang DM , Han JF, Gao ZD , Guo L, Li XL, Sun RJ, Cao MJ |
294 | Cu(In,Ga)Se-2 solar cell with 16.7% active-area efficiency achieved by sputtering from a quaternary target | Physica Status Solidi A- Applications and Materials Science | 2015,212:1774-1778 | SCI,EI | Ouyang LQ, Zhuang DM, Zhao M, Zhang N, Li XL, Guo L, Sun RJ, Cao MJ |
295 | Low-temperature, solution processed metal sulfide as an electron transport layer for efficient planar perovskite solar cells | Journal of Materials Chemistry A | 2015,3:11750-11755 | SCI,EI | Liu J, Gao C, Luo LZ, Ye QY, He XL, Ouyang LQ, Guo XW, Zhuang DM, Liao C, Mei J, Lau WM |
296 | Study on the performance of Tungsten-Titanium alloy film as a diffusion barrier for iron in a flexible CIGS solar cell | Solar Energy | 2015,120:357-362 | SCI,EI | Gao, ZD; Zhao, M; Zhuang, DM; Fu, EG; Li, XL; Ouyang, LQ; Guo, L; Sun, RJ; Kimura, K; Nakajima, K |
297 | Influences of CuO phase on electrical and optical performance of Cu2O films prepared by middle frequency magnetron sputtering | Applied Surface Science | 2015,359:36-40 | SCI,EI | Li Guo, Ming Zhao, Da-Ming Zhuang, MingJie Cao, Liangqi Ouyang, Xiaolong Li, Rujun Sun, Zedong Gao |
298 | A study on phase transformation of SnOx thin films prepared by reactive magnetron sputtering | Materials Science in Semiconductor Processing | 2016,46 :35-38 | SCI,EI | Li Guo, Ming Zhao, Daming Zhuang, Qianming Gong, Hao Tan, Mingjie Cao, and Liangqi Ouyang |
299 | Effects of selenization on phase transition and S/(S plus Se) ratios of as-deposited Cu2ZnSnS4 absorbers sputtered by a quaternary target | Materials Letters | 2016,164 :140- 143 | SCI,EI | Sun RJ, Zhao M, Zhuang DM, Gong QM, Xie M, Ouyang LQ, Guo L, Zhang L |
300 | Cu2ZnSnS4 ceramic target: Determination of sintering temperature by TG-DSC | Ceramics International | 2016-6,42 :9630- 9635 | SCI,EI | Sun Rujun, Zhao Ming, Zhuang Daming, Li Xiaolong, Gong Qianming, Ouyang Liangqi, Guo Li, Cao Mingjie |
301 | High-sulfer Cu2ZnSn(S,Se)4 films by sulfurizing as-deposited CZTSe film: The evolutions of phase, crystallinity and S/(S+Se) ratio | Journal of Alloys and Compounds | 2017-2,695 :3139-3145 | SCI,EI | Rujun Sun; Daming Zhuang, Ph.D.; Ming Zhao; Qianming Gong; Li Guo; Liangqi Ouyang; Yaowei Wei |
302 | The influence of nitrogen implantation on the electrical properties of amouphous IGZO | Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms(NIMB) | 2017-9,406:596- 599 | SCI,EI | S.L.Zhan, M.Zhao, D.M. Zhuang, E.G.Fu, M.J. Cao, L.Guo, L.Q.Ouyang |
303 | The effects of selenium content on Cu(InGa)Se2 thin film solar cells by sputtering from quaternary target with Se-free post annealing | Vacuum | 2017-3,137 :205-208 | SCI,EI | Leng Zhang, Daming Zhuang, , Ming Zhao, Qianming Gong, Li Guo, Liangqi Ouyang, Rujun Sun, Yaowei Wei, Shilu Zhan |
304 | The effects of annealing temperature on CuInGaSe2 solar cell by sputtering from quaternary target with Se-free post annealing | Applied Surface Science | 2017-5,413 :175-180 | SCI,EI | Leng Zhang, Daming Zhuang, Ming Zhao, Qianming Gong, Li Guo, Liangqi Ouyang, Rujun Sun, Yaowei Wei, Shilu Zhan |
305 | Sb2S3 thin films prepared by vulcanizing evaporated metallic precursors | Materials Letters | 2017-11,208 :58-61 | SCI,EI | Leng Zhang, Daming Zhuang, Ming Zhao, Qianming Gong, Li Guo, Liangqi Ouyang, Rujun Sun, Yaowei Wei, Xunyan Lyu, Xiao Peng |
306 | A study on mechanisms of Sb-doping induced grain growth for Cu(InGa)Se-2 absorbers deposited from quaternary targets | Journal of Alloys and Compounds | 2017-8,727 :572-578 | SCI,EI | Zhang Leng, Zhuang Daming, Zhao Ming, Gong Qianming, Guo Li, Ouyang Liangqi, Sun Rujun, Wei Yaowei, Zhan Shilu, Lyu Xunyan, Peng Xiao |
307 | Investigation on Sb-doped induced Cu(InGa)Se-2 films grain growth by sputtering process with Se-free annealing | Solar Energy | 2017-11,157 :1074-1081 | SCI,EI | LengZhang, DamingZhuang, MingZhao, QianmingGong, LiangqiOuyang, LiGuo, RujunSun, YaoweiWei, ShiluZhan, XunyanLyu, XiaoPeng |
308 | The Influence of Sulfurization Temperature on the Properties of Cu2ZnSnS4 Thin Films | CHINESE JOURNAL OF MATERIALS RESEARCH | 41306,27(2):126-130 | EI | XIE Min, ZHUANG Daming, LIU Jiang, GUO Li, SONG Jun |
309 | INFLUENCE OF PRECURSOR'S COMPOSITION ON PROPERTIES OF Cu2ZnSnS4 THIN FILMS | Acta Energiae Solaris Sinica | 41609,34(12):2200-2204 | EI | Xie Min, Zhuang Daming, Zhao Ming, Zhuang Zuolong, Guo Li , Li Bojian, Song Jun |
310 | PREPARATION AND PERFORMANCES OF HIGH DENSITY Cu(In, Ga)Se3 CERAMIC TARGETS | Acta Energiae Solaris Sinica | 2013,34(12):2196-2199 | EI | LI Xiaolong,ZHUANG Daming,ZHAO Ming , ZHANG Zuologn,LIU Jiang,XIE Min,CAO Mingjie,OUYANG Liangqi ,GUO Li |
311 | The Influence of Sulfurization Temperature on the Properties of Cu2ZnSnS4 Thin Films | Chinese Journal of Vacuum Science and Technology | 41730,34(4):391-395 | 国内期刊 | XIE Min, ZHUANG Daming, LIU Jiang, GUO Li, SONG Jun |
312 | Influence of Annealing Temperature on Electric Properties of CuIn1-xGaxSe2 Thin Films | CHINESE JOURNAL OF MATERIALS RESEARCH | 2014,28(10):745-750 | EI | OUYANG Liangqi ,ZHAO Ming ,ZHUANG Daming, SUN Rujun, GUO Li,LI Xiaolong, CAO Mingjie |
313 | A SIMPLE METHOD FOR THE EXTRACTION OF THE DEVICE PARAMETERS OF SOLAR CELLS | Acta Energiae Solaris Sinica | 2014,35(11):2093-2097 | EI | Ouyang Liangqi,Zhuang Daming,LiuJiang, Cao Mingjie,Guo Li |
314 | Electronic Properties of Amorphous Indium-gallium-zinc Oxide Thin Film Fabricated by Magnetron Sputtering | CHINESE JOURNAL OF MATERIALS RESEARCH | 42029,29(1):51-54 | EI | CAO Mingjie, ZHAO Ming, ZHUANG Daming, GUO Li, OUYANG Liangqi,LI Xiaolong, SONG Jun |
315 | EFFECTS OF THE SERIES RESISTANCE ON THE PERFORMANCE OF INHOMOGENEOUS Cu(In, Ga)Se2 SOLAR CELLS | Acta Energiae Solaris Sinica | 2015,36(7):1561-1566 | EI | Ouyang Liangqi,Zhuang Daming, Guo Li, Cao Mingjie,LiuJiang,Li Xiaolong,Xie Min,Song Jun |
316 | Reaction Mechanism of Cu(In, Ga)Se2 Formation During Milling Process of Powder Mixture of Cu2Se, In2Se3 and Ga2Se3 | CHINESE JOURNAL OF MATERIALS RESEARCH | 2016,30(1):1-5 | EI | LI Xiaolong ,ZHAO Ming ,ZHUANG Daming, GONG Qianming, CAO Mingjie,OUYANG Liangqi ,GUO Li SUN Rujun, GAO Zedong |
317 | Optical and Electronic Properties of Nb Doped Indium-zinc Oxide Films Grown by Magnetron Sputtering | CHINESE JOURNAL OF MATERIALS RESEARCH | 42638,30(9):649-654 | EI | CAO Mingjie, ZHAO Ming, ZHUANG Daming, GUO Li, OUYANG Liangqi,SUN Rujun, ZHAN Shilu |
318 | One-step Reduction and Surface Modification of Graphene Oxide by 3-Hydroxy-2-naphthoic acid hydrazide and its Polypropylene Nanocomposites | Nanomaterials | 2017,7(2):25- | SCI | Xiang-Nan Xu, Xiao-Na Guan, Hui-Hua Zhou, Yue-Feng Zhu |
319 | Simultaneous reduction and functionalization of graphene oxide by 4-Hydrazinobenzenesulfonic acid for polymer nanocomposites | Nanomaterials | 2016,6(2):29- | SCI | Song-Jie Qiao, Xiang-Nan Xu, Yang Qiu, He-Chong Xiao, Yue-Feng Zhu |
320 | A novel microstructural design and heat treatment technique based on gradient control of carbon partitioning between austenite and martensite for high strength steels | Science China Technological Sciences | 2013,56(8):1847-1857 | SCI,EI | Feng-Ying Wang, Yue-Feng Zhu, Hui-Hua Zhou, Bo-Zhi Jiang, Guan Wang |
321 | Effects of carbon nanofillers on enhancement of polymer composites | Journal of Applied Physics | 2012,112(7):74302- | SCI,EI | Wen-Jia Chen, Yue-Feng Zhu, Sheng-Xi Wang, Wen-Fei Pei, Yin Jiang |
322 | Effect of structure characteristics of carbon nanotubes on properties of composites | Journal of Reinforced Plastics and Composites | 2012,31(16):1097-1102 | SCI,EI | Yue-Feng Zhu, Wen-Jia Chen, Yin Jiang, Sheng-Xi Wang |
323 | Characterization of A390 aluminum alloy produced at different slow shot speeds using vacuum assisted high pressure die casting | Trans. Nonferrous Met. Soc. China | 2017,27 :2529-2538 | SCI,EI | Wen-bo YU, Zi-hao YUAN, Zhi-peng GUO, Shou-mei XIONG |
324 | Scientific REporTS | 2017,7 :14494- | SCI | J. Wang, Z. Guo, J. L. Song, W. X. Hu, J. C. Li & S. M. Xiong | |
325 | Determination of the interfacial heat transfer coefficient at the metal-sand mold interface in low pressure sand casting | Experimental Thermal and Fluid Science | 2017,88 :472-482 | SCI,EI | A. Zhang, S. Liang, Z. Guo, S. Xiong |
326 | Correlation between crystallographic anisotropy and dendritic orientation selection of binary magnesium alloys | Scientific REporTS | 2017,7 :13600- | SCI | Jinglian Du, Zhipeng Guo, Ang Zhang |
327 | Quantitative phase-field lattice-Boltzmann study of lamellar eutectic growth under natural convection | Journal of Applied Physics | 2017,121 :1-12 | SCI,EI | A. Zhang, Z. Guo, and S.-M. Xiong |
328 | Materials Characterization | 2016,123 :354-359 | SCI,EI | J.Wang, Z. Guo, S.M. Xiong | |
329 | Growth pattern and orientation selection of magnesium alloy dendrite: From 3-D experimental characterization to theoretical atomistic simulation | Acta Materialia | 2016,112 :261-272 | SCI,EI | Yang, M.,Xiong, S. M.,Guo, Z. |
330 | On the tensile failure induced by defect band in high pressure die casting of AM60B magnesium alloy | Materials Science and Engineering A | 2016,674 :687-695 | SCI,EI | Li, X., Xiong, S. M., Guo, Z. |
331 | Failure behavior of high pressure die casting AZ91D magnesium alloy | Materials Science and Engineering A | 2016,672 :216-225 | SCI,EI | Li, X., Xiong, S. M., Guo, Z. |
332 | Thermodynamic Calculation on Equilibrium Precipitated Phases in GH720Li Superalloy | Rare Metal Materials and Engineering | 2017,46(12):3699-3714 | SCI,EI | Su Xianglin; Sun Changbo; Xu Qingyan; Liu Baicheng. |
333 | Numerical Simulation and Experimental Grain Selection of DD6 Superalloy in Spiral Grain Selector by Directional Solidification | Rare Metal Materials and Engineering | 2017,46(7):1856-1861 | SCI,EI | Xu Zilin, Li Zhonglin, Zhang Hang, Xu Qingyan, Liu Baicheng |
334 | Research Status of Numerical Simulation of Selective Laser Melting Process at Home and Abroad | FOUNDRY | 2017,66(7):695-701 | 国内期刊 | TAO Pan, LI Huai-xue, XU Qing-yan, GONG Shui-li |
335 | Modeling of Strain Hardening Behavior and Mechanical Properties of Al-7Si-Mg Cast Aluminum Alloys During Tensile Process | ACTA METALLURGICA SINICA | 2017,53(9):1110-1124 | SCI,EI | CHEN Rui, XU Qingyan, GUO Huiting, XIA Zhiyuan, WU Qinfang, LIU Baicheng |
336 | Modeling Microstructure and Yield Strength during Solidification and Heat Treatment Process in Al-7Si-Mg Cast Aluminum Alloys | Chinese Journal of Rare Metals | 2017,41(8):837-849 | EI | Chen Rui, Xu Qingyan, Guo Huiting, Xia Zhiyuan, Wu Qinfang, Liu Baicheng |
337 | Application of computer simulation technology in turbine blades of aero engines manufacturing | Chinese Journal of Nature | 2017,39(2):79-86 | 国内期刊 | Wang Runnan; Xu Qingyan; Liu Baicheng. |
338 | Application of numerical simulation technology in manufacturing gas turbine blades | Special-cast and Non-ferrous Alloys | 2016,36(12):1233-1238 | 国内期刊 | Xuewei YAN,Ning TANG,Xiaofu LIU,Guoyan SHUI,Qingyan XU,Baicheng LIU |
339 | Modeling the Stress-Strain Curve and Mechanical Properties During Tensile Process in Al-7Si-Mg Cast Aluminum Alloy | Foundry | 2016,65(8):737-743 | 国内期刊 | CHEN Rui, XU Qing-yan, GUO Hui-ting, XIA Zhi-yuan, WU Qin-fang, LIU Bai-cheng |
340 | 金属学报 | 2016,52(8):987-999 | 国内期刊 | 陈瑞; 许庆彦; 柳百成. | |
341 | 单晶高温合金定向凝固过程数值模拟 | 特种铸造及有色合金 | 2016,36(1):1-4 | 国内期刊 | 闫学伟; 唐宁; 刘孝福; 稅国彦; 郭新力; 许庆彦; 柳百成. |
342 | Experimental and simulation of primary dendrite spacing in directional solidification of Al-7Si-0.36Mg alloy |
The Chinese Journal of Nonferrous Metals | 2015,25(10):2613-2622 | EI | CHEN Rui, XU Qing-yan, LIU Bai-cheng |
343 | Acta Metallurgica Sinica | 2015,51(10):1288-1296 | SCI,EI | Xuewei YAN,Ning TANG,Xiaofu LIU,Guoyan SHUI,Qingyan XU,Baicheng LIU | |
344 | Numerical Simulation and Process Optimization of Thermally Controlled Solidification of K4169 Superalloy Engine Case | China Foundry | 2015,64(9):851-855860 | SCI | QI Xiang,ZHANG Yong,GU Huai-peng, LI Bo, LIU Yan, XU Qing-yan |
345 | Acta Metallurgica Sinica | 2015,51(8):976-984 | SCI,EI | Heng SHAO, Yan LI, Hai NAN, Qingyan XU | |
346 | NUCLEATION MODEL AND DENDRITE GROWTH SIMULATION IN SOLIDIFICATON PROCESS OF Al-7Si-Mg ALLOY | ACTA METALLURGICA SINICA | 2015,51(6):733-744 | SCI,EI | CHEN Rui, XU Qingyan , WU Qinfang, GUO Huiting, LIU Baicheng |
347 | Acta Metallurgica Sinica | 2015,51(4):499-52 | SCI,EI | TANG Ning, WANG Yanli, XU Qingyan, ZHAO Xihong, LIU Baicheng | |
348 | Determination of Interfacial Heat Transfer Coefficient During the Investment Casting of Aluminum Alloy | FOUNDRY | 2014,63(10):1010-1013 | 国内期刊 | SHAO Heng, LUO Zhi-hui, LI Yan, ZHAO Ya-li, NAN Hai, XU Qing-yan |
349 | MODELLING INVESTIGATION OF PRECIPITATION KINETICS AND STRENGTHENING FOR NEEDLE/ROD- SHAPED PRECIPITATES IN Al-Mg-Si ALLOYS | ACTA METALLURGICA SINICA | 2016,52(8):987-999 | SCI,EI | CHEN Rui, XU Qingyan, LIU Baicheng |
350 | Special-cast and Non-ferrous Alloys | 2014,34(6):561-565 | 国内期刊 | Tang Ning, Sun Changbo, Zhang Hang, Xu Qingyan, Liu Baicheng | |
351 | Numerical Simulation of Solidification Characteristics of Blades by LMC Based on Secondary Development of ProCAST | FOUNDRY | 2014,63(4):347-351 | 国内期刊 | TANGNing,YANXue-wei,XU Qingyan,LIU Baicheng |
352 | NUMERICAL SIMULATION OF DENDRITE GRAIN GROWTH OF DD6 SUPERALLOY DURING DIRECTIONAL SOLIDIFICATION PROCESS | Acta Metallurgica Sinica | 2014,50(3):345-354 | SCI,EI | ZHANG Hang, XU Qingyan, SHI Zhenxue, LIU Baicheng |
353 | Acta Metallurgica Sinica | 2013,49(12):1508-1520 | SCI,EI | ZHANG Hang, XU Qingyan, SUN Changbo, QI Xiang,TANG Ning, LIU Baicheng | |
354 | Macro and Micro Numerical Simulation of Directional Solidification of Super Alloy SX Turbine Blade | Rare Metal Materials and Engineering | 2013,42(11):2298-2303 | SCI,EI | Tang Ning, Sun Changbo, Zhang Hang, Xu Qingyan, Liu Baicheng |
355 | Simulation and experimental research of melt convection on dendrite morphology evolution | Rare Metal Materials and Engineering | 2013,42(4):900-705 | SCI,EI | Shi Yu-Feng, Xu QingYan, Liu BaiCheng |
356 | Microstructure Simulation to the Solidification Process of Single Crystal Guide Vane | China Foundry | 2013,62(5):415-419 | SCI | SHANG Wei,SUN Chang-bo ,LIU Yan ,LI Bo ,ZHOU Jun-hua ,DU Hong-qiang ,XU Qing-yan |
357 | NUMERICAL SIMULATION OF RECRYSTALLIZATION PROCESS OF NICKEL BASE SINGLE CRYSTAL SUPERALLOY | Acta Metallurgica Sinica | 2013,49(5):523- 529 | SCI,EI | WU Chunlong, XU Qingyan, XIONG Jichun, LI Zhonglin, LI Jiarong,LIU Baicheng |
358 | Directional Solidification and Growth of Peritectic Alloys | FOUNDRY | 2012,61(12):1415-1421 | 国内期刊 | Xujixiang, xuqingyan, liubaicheng |
359 | Numerical Simulation of Mold Filling and Solidification of a Nickel Alloy Vane Investment Casting | FOUNDRY | 2012,61(9):1026- 1030 | 国内期刊 | Sun Changbo; Zhou Junhua; Shang Wei; Zhang Shijun; Guo Haibo; Li Bo; Zhang Xinjia; Xu Qingyan. |
360 | 大型轧钢机机架凝固过程温度场应力场模拟分析 | 中国有色金属学报 | 2012,22(7):1897- 1903 | 国内期刊 | 洪耀武; 王铁军; 韩大平; 许庆彦; 柳百成. |
361 | Numerical simulation of dendrite growth in nickel-based superalloy and validated by in-situ observation using high temperature confocal laser scanning microscopy | Journal of Crystal Growth | 2017,479 :22-33 | SCI,EI | Xuewei Yan; Qingyan Xu; Baicheng Liu. |
362 | Large‐scale simulation of dendrite growth in directional solidification castings | Physica Status Solidi B | 2017,254(10):1770252- | SCI,EI | Hang Zhang and Qingyan Xu. |
363 | A high precision extrapolation method in multiphase-field model for simulating dendrite growth | Computational Materials Science | 2017,136 :133- 143 | SCI,EI | Cong Yang; Qingyan Xu; Baicheng Liu |
364 | Numerical Simulation and Experimental Casting of Nickel-Based Single-Crystal Superalloys by HRS and LMC Directional Solidification Processes | High Temperature Materials and Processes | 2017,36(4):399- 409 | SCI,EI | Wang RN; Yan XW; Li ZL; Xu QY; Liu BC. |
365 | Modeling the precipitation kinetics and tensile properties in Al-7Si-Mg cast aluminum alloys | Materials Science and Engineering A | 2017,685 :403-416 | SCI,EI | Chen R; Xu Q Y; Guo H T; Xia Z Y; Wu Q F; Liu B C. |
366 | Correlation of solidification microstructure refining scale, Mg composition and heat treatment conditions with mechanical properties in Al-7Si-Mg cast aluminum alloys | Materials Science and Engineering A | 2017,685 :391- 402 | SCI,EI | Chen R; Xu Q Y; Guo H T; Xia Z Y; Wu Q F; Liu B C. |
367 | Numerical Simulation of Centrifugal Casting Process of Large Thin-Wall Ti Alloy Casting | Materials Science Forum | 2016,850 :469- 481 | EI | Heng Shao; Yan Li; Peng Zhao; Hai Nan and Qingyan Xu. |
368 | A Model for Prediction of Yield Stress of Heat Treated Al-7Si-Mg Cast Alloys | Materials Science Forum | 2016,850 :409- 418 | EI | Qingyan Xu; Rui Chen; Yufeng Shi and Baicheng Liu. |
369 | Numerical Simulation of Directionally Solidified Industrial Gas Turbine Hollow Blades by Liquid Metal Cooling | Materials Science Forum | 2016,850 :386- 393 | EI | Xuewei Yan; Ning Tang; Xiaofu Liu; Xinli Guo; Guoyan Shui;Qingyan Xu; and Baicheng Liu. |
370 | Numerical simulation on vacuum solution heat treatment and gas quenching process of a low rhenium-containing Ni-based single crystal turbine blade | China Foundry | 2016,13(6):402- 413 | SCI | Zhe-xin Xu; Xiang-lin Su; Qing-yan Xu; Bai-cheng Liu. |
371 | Simulation and Experimental Studies on Grain Selection and Structure Design of the Spiral Selector for Casting Single Crystal Ni-Based Superalloy | Journal of Materials Processing Technology | 2016,238 :132 -141 | SCI,EI | Zhang; Hang; Xu; Qingyan. |
372 | Simulation of the Dendrite Morphology and Microsegregation in Solidification of Al-Cu-Mg Aluminum Alloys | China foundry | 2016,13(2):114- 122 | SCI | Rui Chen; Qing-yan Xu and Bai-cheng Liu. |
373 | Experimental investigation on recrystallization mechanism of a Ni-base single crystal superalloy | Journal of Alloys and Compounds | 2016,672 :457- 469 | SCI,EI | Li Z; Xu Q; Liu B. |
374 | Precipitation behavior and hardening effects of Si-containing dispersoids in Al–7Si–Mg alloy during solution treatment | Materials and Design | 2016,90 :1059- 1068 | SCI,EI | R.Chen; Q.Y. Xu; Z.N. Jia; B.C. Liu. |
375 | Role of as-cast dendritic microstructure in recrystallization of a Ni-based single crystal superalloy | Journal of Alloys and Compounds | 2016,660:115-124 | SCI,EI | Z Li; D Zhang;X Su;Q Xu;B Liu |
376 | Influence of deformation temperature on recrystallization in a Ni-based single crystal superalloy | Materials Letters | 2015,160 :318-322 | SCI,EI | LI Zhonglin; FAN Xiangyu; XU Qingyan and LIU Baicheng |
377 | Microstructure simulation on recrystallization of an as-cast nickel based single crystal superalloy | Computational Materials Science | 2015,107 :122-133 | SCI,EI | Li; Z.; Q. Xu and B. Liu |
378 | Simulation of dendritic competitive growth during directional solidification using modified cellular automaton method | Acta Metallurgica Sinica | 2015,28(2):173-181 | SCI,EI | Chen; Rui; Xu; Qing-Yan; Liu; Bai-Cheng. |
379 | Simulation and Experimental study of Recrystallization Kinetics of Nickel Based Single Crystal Superalloys | Materials Today: Proceedings | 2015,2(2):S440-S452 | SCI | Zhonglin Li; Qingyan Xu; Baicheng Liu. |
380 | Simulation and experiments on plasticity and recrystallisation in SX superalloys by investment casting | MATERIALS RESEARCH INNOVATIONS | 2014,18 :S4331-s4335 | SCI,EI | Z. Li; Q. Xu; J. Xiong; J. Li; B. Liu |
381 | An Integrated Model for Prediction of Yield Stress in Al-7Si-Mg Cast Alloys | Journal of Materials Science & Technology | 2014,30(12):1311-1320 | SCI,EI | Rui Chen; Qingyan Xu; Baicheng Liu. |
382 | Equiaxed and columnar dendrite growth simulation in Al-7Si- Mg ternary alloys using cellular automaton method | Transactions of Nonferrous Metals Society of China | 2014,24(6):1645-1652 | SCI,EI | Chen R; Shi Y F; Xu Q Y; Liu B C. |
383 | Modeling and Simulation of Directional Solidification of Ni-Based Superalloy Turbine Blades Casting by Liquid Metal Cooling | China Foundry | 2014,11(4):268-276 | SCI | Xu Qingyan; Zhang Hang; Liu Baicheng. |
384 | Numerical Simulation and Optimization of Directional Solidification Process of Single Crystal Superalloy Casting | Materials | 2014,7(3):1625-1639 | SCI,EI | Hang ZHANG; Qingyan XU; Baicheng LIU. |
385 | Multiscale Modeling and Simulation of Directional Solidification Process of Turbine Blade Casting with MCA Method | Metallurgical and Materials Transactions B | 2014,45(2):555-561 | SCI,EI | Qingyan Xu; Hang Zhang; Xiang Qi; |
386 | Simulation of dendritic growth for ternary alloys based on modified cellular automaton model | Transactions of Nonferrous Metals Society of China | 2012,22(11):2756-2761 | SCI,EI | SHI Yu-feng; XU Qing-yan; LIU Bai-cheng. |
387 | Progress on modeling and simulation of directional solidification of superalloy turbine blade casting | China Foundry | 2012,9(1):68-77 | SCI | Xu Qingyan; Liu Baicheng; Pan Dong; Yu Jing. |
388 | Highly efficient quasi-static water desalination using monolayer graphene oxide/titania hybrid laminates | NPG ASIA MATERIALS | 2015,7(2):e162- | SCI,EI | Sun,Pengzhan; Chen,Qiao; Li, Xinda; Liu, He; Wang, Kunlin; Zhong, Minlin; Wei, Jinquan; Wu, Dehai; Ma, Renzhi; Takayoshi Sasaki; Zhu, Hongwei |
389 | Graphene/polyaniline woven fabric composite films as flexible supercapacitor electrodes | NANOSCALE | 2015,7(16):7318-7322 | SCI,EI | Zang, Xiaobei; Li, Xiao; Zhu, Miao; Li, Xinming; Zhen, Zhen; He, Yijia; Wang, Kunlin; Wei, Jinquan; Kang, Feiyu; Zhu, Hongwei |
390 | Photo-induced selective gas detection based on reduced graphene oxide/Si Schottky diode | CARBON | 2015,84(1):138-145 | SCI,EI | Zhu, Miao; Li, Xinming; Chung, Sunki; Zhao, Liyun; Li, Xiao; Zang, Xiaobei; Wang, Kunlin; Wei, Jinquan; Zhong, Minlin; Zhou, Kun; Xie, Dan; Zhu, Hongwei |
391 | All carbon coaxial supercapacitors based on hollow carbon nanotube sleeve structure | NANOTECHNOLOGY | 2015,26(4):45401 | SCI,EI | Zang, Xiaobei; Xu, Ruiqiao; Zhang, Yangyang; Li, Xinming; Zhang, Li; Wei, Jinquan; Wang, Kunlin; Zhu, Hongwei |
392 | Hybrid heterojunction and solid state photoelectrochemical solar cells | ADVANCED ENERGY MATERIALS | 2014,4(14):1400224- | SCI,EI | Li, Xiao; Zang, Xiaobei; Li, Xinming; Zhu, Miao; Chen, Qiao; Wang, Kunlin; Zhong, Minlin; Wei, Jinquan; Wu, Dehai; Zhu, Hongwei |
393 | Selective trans-membrane transport of alkali and alkaline earth cations through graphene oxide membranes based on cation-π interaction | ACS NANO | 2014,8(1):850-859 | SCI,EI | Sun, Pengzhan; Zheng, Feng; Zhu, Miao; Song, Zhigong; Wang, Kunlin; Zhong, Minlin; Wu, Dehai; Little, Reginald B; Xu, Zhiping; Zhu, Hongwei |
394 | Highly flexible and adaptable, all solid-state supercapacitors based on graphene woven fabric film electrodes | SMALL | 2014,10(13):2583-2588 | SCI,EI | Zang, Xiaobei; Chen, Qiao; Li, Peiru; He, Yijia; Li, Xiao; Zhu, Miao; Li, Xinming; Wang, Kunlin; Zhong, Minlin; Wu, Dehai; Zhu, Hongwei |
395 | Electro- and magneto-modulated ion transport through graphene oxide membranes | SCIENTIFIC REPORTS | 2014,4 :6798 | SCI | Sun, Pengzhan; Zheng, Feng ; Wang, Kunlin; Zhu, Hongwei |
396 | Magnetic transitions in graphene derivatives | NANO RESEARCH | 2014,7(10):1507-1518 | SCI | Sun, Pengzhan; Wang, Kunlin; Wei, Jinquan; Zhong, Minlin; Wu, Dehai; Zhu, Hongwei |
397 | Three-dimensional porous graphene sponges assembled with the combination of surfactant and freeze-drying | NANO RESEARCH | 2014,7(10):1477-1487 | SCI | Zhang, Rujing; Cao, Yachang; Zang, Xiaobei; Sun, Pengzhan; Wang, Kunlin; Zhong, Minlin; Wei, Jinquan; Wu, Dehai; Kang, Feiyu; Zhu, Hongwei |
398 | Realizing synchronous energy harvesting and ion separation with graphene oxide membranes. | SCIENTIFIC REPORTS | 2014,4 :5528- | SCI | Sun, Pengzhan; Zheng, Feng; Zhu, Miao; Wang, Kunlin; Zhong, Minlin; Wu, Dehai; Zhu, Hongwei |
399 | Interconnected graphene/polymer micro-tube piping composites for liquid sensing | NANO RESEARCH | 2014,7(4):869-876 | SCI | Yang, Tingting; Zhang, Hongze; Wang, Yan; Li, Xiao; Wang, Kunlin; Wei, Jinquan; Wu, Dehai; Li, Zhizhong; Zhu, Hongwei |
400 | Selective ion transport through functionalized graphene membranes based on delicate ion-graphene interactions | JOURNAL OF PHYSICAL CHEMISTRY C | 2014,118(33):19396-19401 | SCI,EI | Sun, Pengzhan; Liu, He; Wang, Kunlin; Zhogn, Minlin; Wang, Kunlin; Zhu, Hongwei |
401 | Torsion sensors of high sensitivity and wide dynamic range based on a graphene woven structure. | NANOSCALE | 2014,6(21):13053-13059 | SCI,EI | Yang, Tingting; Wang, Yan; Li, Xinming; Zhang, Yangyang; Li, Xiao; Wang, Kunlin; Wu, Dehai; Jin, Hu; Li, Zhizhong; Zhu, Hongwei |
402 | Structure evolution of graphene oxide during thermally driven phase transformation: Is the oxygen content really preserved? | PLOS ONE | 2014,9(11):e111908-e111908 | SCI | Sun, Pengzhan; Wang, Yanlei; Liu, He; Wang, Kunlin; Wu, Dehai; Xu, Zhiping; Zhu, Hongwei |
403 | Vertical junction photodetectors based on reduced graphene oxide/silicon Schottky diodes | NANOSCALE | 2014,6(9):4909-4914 | SCI,EI | Zhu, Miao; Li, Xinming; Guo, Yibo; Li, Xiao; Sun, Pengzhan; Zang, Xiaobei; Wang, Kunlin; Zhong, Minlin; Wu, Dehai; Zhu, Hongwei |
404 | Amorphous nitrogen doped carbon films: A novel corrosion resistant coating material | ADVANCED ENGINEERING MATERIALS | 2014,16(5):532-538 | SCI,EI | Zhu, Miao; Li, Xinming; Zhang, Zexia; Sun, Pengzhan; Zang, Xiaobei; Wang, Kunlin; Zhong, Minlin; Wu, Dehai; Zhu, Hongwei |
405 | Correlation between nanoparticle location and graphene nucleation in chemical vapour deposition of graphene. | JOURNAL OF MATERIALS CHEMISTRY A | 2014,2(32):13123-13128 | SCI,EI | Fan, Lili; Wang, Kunlin; Wei, Jinquan; Zhong, Minlin; Wu, Dehai; Zhu, Hongwei |
406 | Effective recovery of acids from iron-based electrolytes using graphene oxide membrane filters | JOURNAL OF MATERIALS CHEMISTRY A | 2014,2(21):7734-7737 | SCI,EI | Sun, Pengzhan; Wang, Kunlin; Wei, Jinquan; Zhong, Minlin; Wu, Dehai; Zhu, Hongwei |
407 | Electricity generation and local ion ordering induced by cation-controlled selective anion transportation through graphene oxide membranes | 2D MATERIALS | 2014,1(3):34004 | SCI,EI | Sun, Pengzhan; Deng, Hui; Zheng, Feng; Wang, Kunlin; Zhong, Minlin; Zhang, Yingjiu; Kang, Feiyu; Zhu, Hongwei |
408 | Evaluation of layer-by-layer graphene structures as supercapacitor electrode materials | JOURNAL OF APPLIED PHYSICS | 2014,115(2):1 | SCI,EI | Zang, Xiaobei; Li, Peixu; Chen, Qiao; Wang, Kunlin; Wei, Jinquan; Wu, Dehai; |
409 | Graphene/semiconductor heterojunction solar cells with modulated antireflection and graphene work function | ENERGY & ENVIRONMENTAL SCIENCE | 2013,6(1):108-115 | SCI,EI | Lin, Yuxuan; Li, Xinming; Xie, Dan; Feng, Tingting; Chen, Yu; Song, Rui; Tian, He; Ren, Tianling; Zhong, Minlin; Wang, Kunlin; Zhu, Hongwei |
410 | Boosting supercapacitor performance of carbon fibers using electrochemically reduced graphene oxide additives | PHYSICAL CHEMISTRY CHEMICAL PHYSICS PCCP | 2013,15(45):19550-19556 | SCI | Cao, Yachang; Zhu, Miao; Li, Peixu; Zhang, Rujing; Li, Xinming; Gong, Qianming; Wang, Kunling; Zhong, Minlin; Wu, Dehai; Lin, Feng; Zhu, Hongwei |
411 | Small temperature coefficient of resistivity of graphene/graphene oxide hybrid films. | ACS APPLIED MATERIALS & INTERFACES | 2013,5(19):9563-9571 | SCI,EI | Sun, Pengzhan; Zhu, Miao; Wang, Kunlin; Zhong, Minlin; Wei, Jinquan; Wu, Dehai; Zhu, Hongwei |
412 | Direct synthesis of graphene quantum dots by chemical vapor deposition | PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION | 2013,30(9):764-769 | SCI,EI | Fan, Lili; Zhu, Miao; Lee, Xiao; Zhang, Rujing; Wang, Kunlin; Wei, Jinquan; Zhong, Minlin; Wu, Dehai; Zhu, Hongwei |
413 | Flexible graphene woven fabrics for touch sensing. | APPLIED PHYSICS LETTERS | 2013,102(16):1530 | SCI,EI | Lee, Xiao; Yang, Tingting; Li, Xiao; Zhang, Rujing; Zhu, Miao; Zhang, Hongze; Xie, Dan; Wei, Jinquan; Zhong, Minlin; Wang, Kunlin; Wu, Dehai; Li, Zhihong; Zhu, Hongwei |
414 | Growth orientations and morphologies of a-Mg dendrites in Mg–Zn alloys | Scripta Materialia | 2012,67(7):629-632 | SCI,EI | M.Y.Wang,Y.J.Xu,T.Jing,G.Y.Peng,Y.N.Fu,N.Chawl |
415 | Temperature-dependent mechanical properties of an austenitic-ferritic stainless steel studied by in situ tensile loading in a scanning electron microscope (SEM) | Materials Science and Engineering A | 2013,580 :159-168 | SCI,EI | En-YuGuo,Ming-YueWang,TaoJing,NikhileshChawl |
416 | Accurate Modeling and Reconstruction of Three-Dimensional Percolating FilamentaryMicrostructures from Two-Dimensional Micrographs via Dilation-Erosion Method | Materials Characterization | 2014,89 :33-42 | SCI,EI | En Yu Guo, Nikhilesh Chawla, Tao Jing, Salvatore Torquato, Yang Jiao |
417 | Modelling ofSecondary Dendrite Arms Evolution during Solidification by a Phase-field Method | Materials Today | 2015,(3):s466-s473 | SCI | Qi-WeiZheng,TaoJing,Hong-biaoDong |
418 | Characterisation of three-dimensional dendritic morphology and orientation selection of α-Mg in Mg–Ca alloy using synchrotron X-ray tomography | Materials Characterization | 2016,111 :170-176 | SCI,EI | SansanShuai,EnyuGuo,QiweiZheng,MingyueWang,TaoJing |
419 | Three-dimensional α-Mg dendriticmorphology and branching structure transition in Mg-Zn alloys | Materials Characterization | 2016,118 :304-308 | SCI,EI | SansanShuai,EnyuGuo,QiweiZheng,MingyueWang,TaoJing,YananFu |
420 | Fast synchrotron X-ray tomography quantification of the dendritic evolution during the solidification of Mg-Sn alloys | ACTA MATERIALIA | 2016,118 :260-269 | SCI,EI | SansanShuai,EnyuGuo,A.B.Phillion,Mark D.Callaghan,TaoJing,Peter D.Lee |
421 | RESEARCH PROGRESS ON 3D DENDRITE MORPHO-LOGY AND ORIENTATION SELECTION DURING THE SOLIDIFICATION OF Mg ALLOYS: 3D EXPERIMENTAL CHARACTERIZATION AND PHASE FIELD MODELING | Acta Metall | 2016,52(10):1279-1296 | SCI,EI | JING Tao, SHUAI Sansan, WANG Mingyue, ZHENG Qiwei |
422 | Anomalous α-Mg dendrite growth morphologies during directional solidification of a Mg-Zn alloy | Metallurgicaland Materials Transactions A-Physical Metallurgyand Materials Science | 2016,47A(9):4368-4373 | SCI,EI | Sansan ShuaiEnyu GuoMingyue WangMark D. CallaghanTao Jing |
423 | Transparent magnetic semiconductors from ferromagnetic amorphous alloys |
Acta Physica Sinica | 2017,66(17):197-207 | SCI,EI | Chen Na, Zhang Ying-Qi, Yao Ke-Fu |
424 | Modeling and Experimental Validation of the Electron Beam Selective Melting Process | Applied Physics Letters | 2017,111 :11905- | SCI,EI | Yang G.N., Li Z., Gao F.M., Luo Y., Han Z.D., Lu Z.C., Wei J.Q., Shao Y., Yao K.F. |
425 | The multiple shear bands and plasticity in metallic glasses : A possible origin from stress redistribution | Journal of Alloys and Compounds | 2016,695 :3457-3466 | SCI,EI | Yang G.N., Sun B.A., Chen S.Q. Shao Y. and Yao K.F. |
426 | A non-viscous-featured fractograph in metallic glasses | Materials & Design | 2016,96 :189-194 | SCI,EI | Yang G.N., Shao Y. and Yao K.F. |
427 | Serration behaviours in metallic glasses with different plasticity | Metallurgical and Materials Transactions A | 2016,47(11):5395-5400 | SCI,EI | Yang G.N., Gu J.L., Chen S.Q., Shao Y., Wang H., Yao K.F. |
428 | Size effect in Pd77.5Cu6Si16.5 metallic glass micro-wires: More scattered strength with decreasing diameter | Philosophical Magazine | 2016,96 :542-550 | SCI,EI | Yang G.N., Shao Y. and Yao K.F. |
429 | Serration behaviours in metallic glasses with different plasticity | Philosophical Magazine | 2016,96 :2243-2255 | SCI,EI | Yang G.N., Chen S.Q., Gu J.L., Zhao S.F., Li J.F., Shao Y., Wang H., Yao K.F. |
430 | The shear band controlled deformation in metallic glass: a perspective from fracture | Advances in Materials Science and Engineering | 2014, :490181- | SCI,EI | Shao Y, Yang G.N., Yao K.F |
431 | Fabrication and molecular dynamics analyses of highly thermal conductive reduced graphene oxide films at ultra-high temperatures | NANOSCALE | 2017,9(6):2340-2347 | SCI,EI | Huang, Yilun;Gong, Qianming;Zhang, Qi;Shao, Yang;Wang, Junjie;Jiang, Yanqi;Zhao, Ming;Zhuang, Daming;Liang, Ji |
432 | Experimental and Correlative Analyses of the Ageing Mechanism of Activated Carbon Based Supercapacitor | ELECTROCHIMICA ACTA | 2017,228 :214-225 | SCI,EI | Huang, Yilun;Zhao, Yang;Gong, Qianming;Weng, Mouyi;Bai, Junfei;Liu, Xi;Jiang, Yanqi;Wang, Junjie;Wang, Dazhi;Shao, Yang;Zhao, Min;Zhuang, Daming;Liang, Ji |
433 | Performance enhancement of liquid antimony anode fuel cell by in situ electrochemical assisted oxidation process | ENERGY | 2017,125 :526-532 | SCI,EI | Cao, Tianyu;Shi, Yixiang;Jiang, Yanqi;Cai, Ningsheng;Gong, Qianming |
434 | Flexible route to fabricate excellent adsorbents for vitamin B-12 by specially designed oil-drop process | MICRO & NANO LETTERS | 2016,11(4):188-191 | SCI,EI | Guo, Bingzhi;Huang, Yilun;Gong, Qianming;Wang, Junjie;Zhuang, Daming;Liang, Ji |
435 | Carbon Nanotube-Chitosan Composite Beads with Radially Aligned Channels and Nanotube-Exposed Walls for Bilirubin Adsorption | ADVANCED ENGINEERING MATERIALS | 2015,17(4):460-466 | SCI,EI | Ouyang, An;Gong, Qianming;Liang, Ji |
436 | Fabrication of uniform porous CNTs/activated carbon composite spheres by oil-drop method in stratified oils and their adsorption of VB12 | RSC ADVANCES | 2015,5(58):46997-47003 | SCI,EI | Guo, Bingzhi;Gong, Qianming;Wang, Junjie;Huang, Yilun;Zhuang, Daming;Liang, Ji |
437 | Chemical vapor infiltration tailored hierarchical porous CNTs/C composite spheres fabricated by freeze casting and their adsorption properties | RSC ADVANCES | 2015,5(22):16870-16877 | SCI,EI | Wang, Junjie;Gong, Qianming;Zhuang, Daming;Liang, Ji |
438 | Fabrication of CrSi2/MoSi2/SiC–Mo2C gradient composite coating on Mo substrate and the stabilizing effect of Cr on the coating’s anti-oxidation properties | Surface & Coating Technology | 2015,282 :188-199 | SCI,EI | Yanqi Jiang,Qianming Gong, Zhipeng Cai,YangShao,Daming Zhuang,Ji Liang |
439 | Technologies and properties investigations of CNTs reinforced 3Y-ZrO2 ceramics with hot-pressing sintering | Materials Science and Engineering of Powder Metallurgy | 2014,19(2):320-327 | SCI,EI | ZHOU Ji-ping, GONG Qian-ming, LIANG Ji |
440 | In-situ fabrication of MoSi2/SiC-Mo2C gradient anti-oxidation coating on Mo substrate and the crucial effect of Mo2C barrier layer at high temperature | APPLIED SURFACE SCIENCE | 2014,308 :261-268 | SCI,EI | Liu, Jun;Gong, Qianming;Shao, Yang;Zhuang, Daming;Liang, Ji |
441 | Forming process of in-situ growing CNTs/CFF/EP lamellar composites | Chinese Journal of Nonferrous Metals | 2013,23(5):1275-1281 | EI | Ren Chong; Wang Te; Gong Qian-ming; Liang Ji |
442 | Influence of drying process on re-dispersibility of CNTs | Journal of Central South University | 2012,43(10):3833-3840 | EI | Zou Ying-dong; Wang Te; Lu Yue-mei; Gong Qian-ming; Liang Ji |
443 | Perovskite Solar Cells Fabricated by Using an Environmental Friendly Aprotic Polar Additive of 1,3-Dimethyl-2-imidazolidinone | NANOSCALE RESEARCH LETTERS | 2017,12 :6321-6325 | SCI,EI | Zhi, Lili; Li, Yanqing ;Cao, Xiaobing; Li, Yahui;Cui, Xian;Ci, Lijie ; Wei, Jinquan |
444 | Fabrication of high quality perovskite films by modulating the Pb-O bonds in Lewis acid-base adducts | JOURNAL OF MATERIALS CHEMISTRY A | 2017,5(18):0119051-0119056 | SCI,EI | Cao XB, Li CL, Zhi LL, Li YH, Cui X, Yao YW, Ci LJ, Wei JQ |
445 | Modulating Hysteresis of Perovskite Solar Cells by a Poling Voltage | JOURNAL OF PHYSICAL CHEMISTRY C | 2016,120(40):22784-22792 | SCI,EI | Cao XB, Li YH, Li C, Fang F, Yao YW, Cui X, Wei JQ |
446 | Stretchable and compressible strain sensors based on carbon nanotube meshes | NANOSCALE | 2016,8(46):19352-19358 | SCI,EI | Guo FM, Cui X, Wang KL, Wei JQ, |
447 | Enhanced performance of perovskite solar cells by modulating the Lewis acid-base reaction | NANOSCALE | 2016,8(47):19804-19810 | SCI,EI | Cao XB, Li CL, Li YH, Fang F, Cui X, Yao YW, Wei JQ, |
448 | High quality perovskite films fabricated from Lewis acid-base adduct through molecular exchange | RSC ADVANCES | 2016,6(75):70925-70931 | SCI,EI | Cao XB, Li YH, Fang F, Cui X, Yao YW, Wei JQ |
449 | High performance of stretchable carbon nanotube-polypyrrole fiber supercapacitors under dynamic deformation and temperature variation | JOURNAL OF MATERIALS CHEMISTRY A | 2016,4(23):9311-9318 | SCI,EI | Guo FM, Xu RQ, Cui X, Zhang L, Wang KL, Yao YW, Wei JQ |
450 | Fabrication of highly conductive carbon nanotube fibers for electrical application | MATERIALS RESEARCH EXPRESS | 2015,2(9):956041-956046 | SCI | Guo FM, Li C, Wei JQ, Xu RQ, Zhang ZL, Cui X, Wang KL, Wu DH |
451 | Perovskite Solar Cell Using a Two-Dimensional Titania Nanosheet Thin Film as the Compact Layer | ACS APPLIED MATERIALS & INTERFACES | 2015,7(28):15117-15122 | SCI,EI | Li C, Li YH, Xing YJ, Zhang ZL, Zhang XF, Li Z, Shi YT, Ma TL, Ma RZ, Wang KL, Wei JQ |
452 | High performance carbon nanotube based fiber-shaped supercapacitors using redox additives of polypyrrole and hydroquinone | JOURNAL OF MATERIALS CHEMISTRY A | 2015,3(44):22353-22360 | SCI,EI | Xu RQ, Guo FM, Cui X, Zhang L, Wang KL, Wei JQ |
453 | Highly flexible tailorable and all-solid-state supercapacitors from carbon nanotube-MnOx composite films | RSC ADVANCES | 2015,5(108):89188-89194 | SCI,EI | Guo FM, Xu RQ, Cui X, Zang XB, Zhang L, Chen Q, Wang KL, Wei JQ |
454 | Highly conductive twistable and bendable polypyrrole-carbon nanotube fiber for efficient supercapacitor electrodes | RSC ADVANCES | 2015,5(28):22015-22021 | SCI,EI | Xu RQ, Wei JQ, Guo FM, Cui X, Zhang TY, Zhu HW, Wang KL, Wu DH |
455 | Flexible carbon nanotube/mono-crystalline Si thin-film solar cells | NANOSCALE RESEARCH LETTERS | 2014,9 :514- | SCI,EI | Sun, Huanhuan; Wei, Jinquan; Jia, Yi |
456 | Fabrication and Oil Adsorption of Carbon Nanotube/Polyvinylpyrrolidone Surface Composite | JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2014,14 :6461-6465 | SCI,EI | Nan, Dou; Wei, Jinquan; Guo, Fengmei |
457 | Fabrication and Electrical Properties of Semi-Conductive h-BNCx Thin Films | SCIENCE OF ADVANCED MATERIALS | 2014,6 :550-557 | SCI | Guo, Ning; Wei, Jinquan; Jia, Yi |
458 | Effect of microwave irradiation on carbon nanotube fibers: exfoliation, structural change and strong light emission | RSC ADVANCES | 2014,4 :15502-15506 | SCI,EI | Sun, Huanhuan; Wei, Jinquan; Sun, Jialin |
459 | A large area, flexible polyaniline/buckypaper composite with a core-shell structure for efficient supercapacitors | JOURNAL OF MATERIALS CHEMISTRY A | 2014,2 :5898-5902 | SCI,EI | He, Shaoqing; Wei, Jinquan; Guo, Fengmei |
460 | Stable superhydrophobic surface of hierarchical carbon nanotubes on Si micropillar arrays | NANOSCALE RESEARCH LETTERS | 2013,8 :412- | SCI,EI | He, Shaoqing; Wei, Jinquan; Wang, Haifan |
461 | Fabrication of large area hexagonal boron nitride thin films for bendable capacitors | NANO RESEARCH | 2013,6 :602-610 | SCI | Guo, Ning; Wei, Jinquan; Jia, Yi |
462 | The influence of gas absorption on the efficiency of carbon nanotube/Si solar cells | APPLIED PHYSICS LETTERS | 2013,102 :1431051-1431054 | SCI,EI | Bai, X.; Wei, J. Q.; Jia, Y. |
463 | Experimental research on the flow instability and level fluctuation in continuous thin slab casting mould | Metallurgical Research and Technology | 2017,114(1):1031-1039 | SCI,EI | Jin, Liqin; Cheng, Jian; Shen, Houfa. |
464 | Projection- and characteristic-based operator-splitting simulation of mixed convection flow coupling heat transfer and fluid flow in a lid-driven square cavity | Numerical Heat Transfer, Part B: Fundamentals | 2016,70(4):354-371 | SCI,EI | Jin, Liqin; Shen, Houfa: |
465 | Numerical simulation of macrosegregation during solidification of binary alloys | Rare Metals | 2016,35(8):591-597 | SCI,EI | Tu, Wu-Tao; Shen, Hou-Fa; Liu, Bai-Cheng |
466 | A Numerical Study of the Effect of Multiple Pouring on Macrosegregation in a 438-Ton Steel Ingot | Acta Metallurgica Sinica | 215,28(9):1123-1133 | SCI,EI | Duan Zhen-Hu; Shen Hou-Fa; Liu Bai-Cheng. |
467 | Numerical study of macrosegregation in a large steel ingot with multiple pouring process | Materials Science and Engineering | 2015,84 :12048 | SCI,EI | Zhenhu Duan, Xuan Du, Houfa Shen, Baicheng Liu |
468 | Numerical simulation of convection and inclusion distribution during solidification in a heavy steel ingot | Materials Science and Engineering | 2015,84 :12101 | SCI,EI | Lin Rui; Shen Houfa. |
469 | Modelling of macrosegregation in a 231-ton steel ingot with multi-pouring process | Materials Research Innovations | 2015,19(4):59-64 | SCI,EI | Tu W.T.; Shen H.F.; Liu B. C. |
470 | Numerical Simulation of Multiple Pouring Process in a 292-t Steel Ingot | China Foundry | 2014,11(1):52-58 | SCI | Tu Wutao, Zhang Xiong, Shen Houfa, Liu Baicheng. |
471 | Two-Phase Modeling of Macrosegregation in a 231t Steel Ingot | ISIJ Inter. | 2014,54(2):351-355 | SCI,EI | Tu Wutao, Shen Houfa, Liu Baicheng. |
472 | Thermo-mechanical Modeling in Continuous Slab Casting Mould and Its Application | ISIJ Inter. | 2014,54(2):336-341 | SCI,EI | Zhang Daojie, Lei Song, Zeng Shan, Shen Houfa. |
473 | Measurement of temperature inside die and estimation of interfacial heat transfer coefficient in squeeze casting | CHINA FOUNDRY | 2017,14(5):327-332 | SCI | Wang, Feifan; Wu, Keyan; Wang, Xuyang; Han, Zhiqiang |
474 | Experimental study on the heat transfer behavior and contact pressure at the casting-mold interface in squeeze casting of aluminum alloy | INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2017,112 :1032-1043 | SCI,EI | Wang, Feifan; Ma, Qingxian; Meng, Wen; Han, Zhiqiang |
475 | A phase field model coupled with pressure-effect-embedded thermodynamic modeling for describing microstructure and microsegregation in pressurized solidification of a ternary magnesium alloy | COMPUTATIONAL MATERIALS SCIENCE | 2017,136 :264-270 | SCI,EI | Shang, Shan; Han, Zhiqiang; Sun, Weihua; Luo, Alan |
476 | Modeling of Austenite Decomposition during Continuous Cooling Process in Heat Treatment of Hypoeutectoid Steel with Cellular Automaton Method. | STEEL RESEARCH INTERNATIOnal | 2017,88(9):16004901-160049012 | SCI,EI | Su, Bin; Ma, Qingxian; Han, Zhiqiang |
477 | On the kinetics of dendritic sidebranching: A three dimensional phase field study. | JOURNAL OF APPLIED PHYSICS | 2016,119(16):1643051-1643058 | SCI,EI | Shang, Shan; Guo, Zhipeng; Han, Zhiqiang |
478 | Study on Dendritic Growth in Pressurized Solidification of Mg–Al Alloy Using Phase Field Simulation. | JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY | 2016,32(1):68-75 | SCI,EI | Pan, Haowei; Han, Zhiqiang; Liu, Baicheng |
479 | Microstructure characteristics and effect of aging process on the mechanical properties of squeeze-cast AZ91 alloy | JOURNAL OF ALLOYS AND COMPOUNDS | 2015,641 :56-63 | SCI,EI | Han, Guomin; Han, Zhiqiang; Luo, Alan; Liu, Baicheng |
480 | Large-scale three-dimensional phase-field simulation of multi-variant β-Mg17Al12 in Mg–Al-based alloys | COMPUTATIONAL MATERIALS SCIENCE | 2015,101 :248-254 | SCI,EI | Han, Zhiqiang; Han, Guomin; Luo, Alana; Liu, Baicheng |
481 | Three-Dimensional Phase-Field Simulation and Experimental Validation of β-Mg17Al12 Phase Precipitation in Mg-Al-Based Alloys | METALLURGICAL AND MATERIALS TRANSCATIONS A | 2015,46(2):948-962 | SCI,EI | Han, Guomin; Han, Zhiqiang; Luo, Alana; Liu, Baicheng |
482 | Study on Pressurized Solidification Behavior and Microstructure Characteristics of Squeeze Casting Magnesium Alloy AZ91D | METALLURGICAL AND MATERIALS TRANSCATIONS B | 2015,46(1):328-336 | SCI,EI | Han, Zhiqiang; Pan, Haowei; Li, Yanda; Luo, Alana; Sachdev, Anilk |
483 | A Coupled Thermo-mechanical Simulation of Squeeze Casting Solidification Process of Subframe for Automobile | Special-cast and Non-ferrous Alloys | 2015,35(1):52-56 | 国内期刊 | Tang Jie, Wang Feifan, Han Zhiqiang, Sun Jue, Xu Shanxin |
484 | Development of Squeeze Casting Technology for Manufacturing Aluminum Alloy Subframe for Automobile | FOUNDRY | 2015,64(1):17-21 | 国内期刊 | SUN Jue, XU Shan-xin, TANG Jie, WANG Fei-fan, HAN Zhi-qiang |
485 | Numerical Simulation of Microstructure Evolution of Heavy Steel Casting in Casting and Heat Treatment Processes | ISIJ INTERNATIONAL | 2014,54(2):408-414 | SCI,EI | Su, Bin; Han, Zhiqiang; Zhao, Yongrang; Shen, Bingzhen; Xu, Enxian; Huang, Shujun; Liu, Baicheng |
486 | A phase field model for simulating the precipitation of multi-variant β-Mg17Al12 in Mg–Al-based alloys | SCRIPTA MATERIALIA | 2013,68(9):691-694 | SCI,EI | Han, Guomin; Han, Zhiqiang; Luo, Alana; Sachdev, Anilk; Liu, Baicheng |
487 | Cellular Automaton Modeling of Austenite Nucleation and Growth in Hypoeutectoid Steel during Heating Process | ISIJ INTERNATIONAL | 2013,53(3):527-534 | SCI,EI | Su, Bin; Han, Zhiqiang; Liu, Baicheng |
488 | PHASE FIELD SIMULATION ON MORPHOLOGY OF CONTINUOUS PRECIPITATE Mg_(17)Al_(12)IN Mg-Al ALLOY | Acta Metallurgica Sinica | 2013,49(3):277-283 | SCI,EI | G Han, Z Han, AA Luo , AK Sachdev , B Liu |
489 | Fracture behaviors of A390 aluminum cylinder liner alloys under static loading | JOURNAL OF ALLOYS AND COMPOUNDS | 2013,550 :370-379 | SCI,EI | Cha, Guoji; Li, Jianguo; Xiong, Shoumei; Han, Zhiqiang |
490 | Macro- and micro-simulation and experiment study on microstructure and mechanical properties of squeeze casting wheel of magnesium alloy | Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) | 2017:273-282 | SCI,EI | Shang, Shan; Hu, Bin; Han, Zhiqiang; Sun, Weihua; Luo, Alan |
491 | Phase field simulation on microstructure evolution in solidification and aging process of squeeze cast magnesium alloy | IOP Conference Series: Materials Science and Engineering | 2015:12065 | SCI,EI | Pan, Haowei; Han, Guomin; Han, Zhiqiang; Liu, Baicheng |
492 | A Coupled Thermo-Mechanical Simulation on Squeeze Casting Solidification Process of Three-Dimensional Geometrically Complex Components | Advances in the Science and Engineering of Casting Solidification | 2015:113-120 | EI | Tang, Jie; Han, Zhiqiang; Wang, Feifan; Sun, Jue; Xu, Shanxin |
493 | Phase field simulation on dendritic growth in pressurized solidification of Mg-Al alloy | TMS 2015 144th Annual Meeting & Exhibition | 2015:107-113 | SCI,EI | Pan, Haowei; Han, Zhiqiang; Luo,Alan; Liu, Baicheng |
494 | Study on microstructure and mechanical property of squeeze casting AZ91D magnesium alloy | Magnesium Technology | 2013:347-350 | EI | Li, Yanda; Han, Zhiqiang; Luo, Alan; Sachdev, Anilk; Liu, Baicheng |
495 | Study on effects of interface anisotropy and elastic interaction on precipitate evolution of a Mg-Al alloy by phase field modeling | In EPD Congress 2013 (eds M. L. Free and A. H. Siegmund) | 2013:97-105 | EI | Han, Guomin; Han, Zhiqiang; Luo, Alan; Sachdev, Anilk; Liu, Baicheng |
496 | Numerical simulation of the macrostructure evolution of a heavy steel ingot | Materials Science and Technology (United Kingdom) | 2017,33(5):474-482 | SCI,EI | Kang, J.; Zhang, C.; Wang, T.; Wang, S.; Shen, H.; Liu, B. |
497 | The role and impact of 3D printing technologies in casting | China Foundry | 2017,14(3):157-168 | SCI | Kang, Jinwu; Ma, Qiang-xian . |
498 | Application of insulation padding in a heavy turbine guide vane casting | Journal Of Iron and Steel Research International | 2017,24(5):495-500 | SCI,EI | Kang, Jin-wu; Ma, Qing-xian; Zhang, Chi;. |
499 | 3D-printed shell-truss sand mold for aluminum castings | Journal of Materials Processing Technology | 2017,250 :247-253 | SCI,EI | Shangguan, Haolong; Kang, Jinwu; Deng, Chengyang. |
500 | The Comparison of Intensive Riser Cooling of Castings After Solidification in Three Classic Metals | Light Metals | 2017, :867-876 | EI | Haolong Shangguan, Jinwu Kang. |
501 | Study on a kind of delicate sand mould for casting | FIMPART | 2017, :- | Jinwu Kang, Haolong Shangguan, Chengyang Deng, Yongyi Hu, | |
502 | Water Analogy Experiment on the Multi-concentration Pouring Process of a 585 Ton Steel Ingot | Frontiers in Materials Processing | 2017, :107-122 | Jinwu Kang, Chi Zhang, Chao Dong, Houfa Shen and Baicheng Liu. | |
503 | 智能铸型研究 | 全国地方机械工程学会学术年会暨海峡两岸机械科技学术论坛. 2017. | 2017, :117-124 | 国内期刊 | 康进武; 上官浩龙; 邓承佯; 易吉豪; 胡永沂; 黄涛, |
504 | Stereo 3D spatial phase diagrams | Journal of Alloys and Compounds | 2016,673 :309-313 | SCI,EI | Jinwu Kang and Baicheng Liu, |
505 | Novel application of ultrasonic cavitation for fabrication of TiN/Al composites | Journal of Alloys and Compounds | 2016,661 :176-181 | SCI,EI | Jiyu Ma, Jinwu Kang,Tianyou Huang |
506 | Intensive riser cooling of castings after solidification | Journal of Materials Processing Technology | 2015,215 :278-286 | SCI,EI | Kang, Jinwu;Hao, Xiaokun;Nie, Gang;Long, Haimin;Liu, Baicheng, |
507 | Reply to Discussion of "Observation of the Mold Filling Process of a Large Hydro-Turbine Guide Vane Casting" | Metallurgical and Materials Transactions B, | 2015,46(4):1564-1564 | SCI,EI | Kang, JW;Long, HM;Li, YJ;You, R;Hao, XKNie, G;Wang, TJ;Zhang, CC |
508 | The comparison of ultrasonic effects in different metal melts | Ultrasonics | 2015,57 :11-17 | SCI,EI | Jinwu Kang,Xiaopeng Zhang, Shuo Wang, Jiyu Ma, Tianyou Huang |
509 | MEASUREMENT OF THE FILLING PROCESS OF A LARGE TURBINE GUIDE VANE | 中国机械工程学会铸造分会质量控制及检测技术委员会第十届学术年会论文集 | 2012, :- | 国内期刊 | KANG Jinwu, ZHANG Chengchun, LONG Haimin, YOU Rui, HAO Xiaokun, NIE Gang, WANG Tianjiao |
510 | Study on the Insulation Padding in the Production of Heavy Steel Casting | Foundry | 2015,64(12):1242-1246 | 国内期刊 | ZHANG Chi, KANG Jin-wu, DAI Yan-tao, LI Peng, LI Feng-yu, PEI Lin |
511 | 大型铸钢件凝固后冒口强制冷却技术研究 | 2015中国铸造活动周论文集 | 2015 | 国内期刊 | 康进武; 聂刚; 王天骄; 周佩超; 刘忠仁; 李祖良; 张浩 |
512 | Ultrasonic Treatment of the 304 Stainless Steel Melt | ISIJ International | 2014,54(2):281-287 | SCI,EI | Jinwu Kang, Xiaopeng Zhang, Yisen Hu, Jiyu Ma,Yongyi Hu and Tianyou Huang |
513 | A Water Analog Experimental Method for the Diffusion and Distribution of Alloy elements in Liquid Steel during Ingot Filling Process | ISIJ International | 2014,54(2):275-280 | SCI,EI | Jinwu Kang, Chao dong, Xiaokun Hao, Gang Nie, Houfa Shen and Baicheng Liu . |
514 | Deformation Prediction of a Heavy Hydro Turbine Blade During the Casting Process with Consideration of Martensitic Transformation | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2015,44A(12):5343-5353 | SCI,EI | Kang jinwu, Wang, Tianjiao;Huang, Tianyou;B., Liu |
515 | Observation of the Mold-Filling Process of a Large Hydro-Turbine Guide Vane Casting | Metallurgical and Materials Transactions B | 2013,46(1):337-344 | SCI,EI | Jinwu Kang,Haimin Long,Yongjie Li,Rui You,Xiaokun Hao,Gang Nie,Tianjiao Wang,Chengchun Zhang, |
516 | Measurement and observation of the filling process of steel castings | Materials Processing Fundamentals. | 2013:73-80 | EI | Jinwu Kang, Gang Nie, Haimin Long, Rui You, Xiaokun Hao, Tianjiao Wang, Chengchun Zhang, |
517 | Numerical Simulation of the Microstructure Evolution of Heavy Steel Ingots | ISIJ International | 2014, :408–414 | SCI,EI | Jinwu Kang, Chi Zhang, Tianjiao Wang, Houfa Shen and Baicheng Liu. |
518 | Effect of different air content on cavitation with ultrasonic treatmen | Advanced Materials Research | 2013, :655-657 | SCI,EI | Kang, Jinwu;Hu, Yisen;Ma, Jiyu;Huang, Tianyou |
519 | A new method for ultrasonic treatment on the melt of steel TMS Annual Meeting | Materials Processing Fundamentals | 2013 | EI | Nie Gang, Kang, Jinwu;Hu, Yisen;You, Rui;Ma, Jiyu;Hu, Yongyi;Huang, Tianyou |
520 | Development of a parallel adaptive multigrid algorithm for solving the multi-scale thermal-solute 3D phase-field problems | Computational Materials Science | 2017,124 :89-98 | SCI,EI | JunWu;ZhipengGuo;ChaoLuo |
521 | On the growth mechanism of the primary silicon particle in a hypereutectic Al-20wt%Si alloy using synchrotron X-ray tomography | Materials Design | 2017,137 :176-183 | SCI,EI | J.Wang;Z.Guo;J.L.Song;W.X.Hu;J.C.Li;S.M.Xiong |
522 | Morphology transition of the primary silicon particles in a hypereutectic A390 alloy in high pressure die casting | Scientific Report | 2017,7 :14994 | SCI | J. Wang, Z. Guo, J. L. Song, W. X. Hu, J. C. Li & S. M. Xiong |
523 | Multiscale Simulation of α-Mg Dendrite Growth via 3D Phase Field Modeling and Ab Initio First Principle Calculations | Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) | 2017, :263-272 | SCI,EI | Jinglian DuZhipeng GuoManhong YangShoumei Xiong |
524 | Eutectic pattern transition under different temperature gradients: A phase field study coupled with the parallel adaptive-mesh-refinement algorithm | Journal of Applied Physics | 2017,121(12):125101 | SCI,EI | A. Zhang, Z. Guo, and S.-M. Xiong |
525 | Interfacial heat transfer behavior at metal/die in finger-plated casting during high pressure die casting process | China Foundry | 2017,14(4):258-268 | SCI | Wen-bo YuSong LiangYong-you CaoXiao-bo Li Zhi-peng Guo Shou-mei Xiong |
526 | Microstructure evolution and bonding mechanism of Ti2SnC-Ti6Al4V joint by using Cu pure foil interlayer | Materials Characterization | 2017,127 :53-59 | SCI,EI | W.Yu; H.Zhao; Z.Huang; X.Chen; Y.Aman; S.Li; H.Zhai; Z.Guo;S.Xiong |
527 | Microstructure, mechanical properties and fracture mechanism of Ti2AlC reinforced AZ91D composites fabricated by stir casting | Journal of Alloys and Compounds | 2017,702 :199-208 | SCI,EI | WenboYu; XiaojunWang; HongbinZhao; ChaoDing; ZhenyingHuang; HongxiangZhai; ZhipengGuo; ShoumeiXiong |
528 | Determination of Interfacial Heat Transfer Behavior at the Metal/Shot Sleeve of High Pressure Die Casting Process of AZ91D Alloy | Journal of Materials Science & Technology | 2017,33(1):52-58 | SCI,EI | WenboYu; YongyouCao; XiaoboLi; ZhipengGuo; ShoumeiXiong |
529 | Influence of melt flow on the formation of defect band in high pressure die casting of AZ91D magnesium alloy | Materials Characterization | 2017,129 :344-354 | SCI,EI | XiaoboLi; ZhipengGuo; ShoumeiXiong |
530 | Atomistic Determination of Anisotropic Surface Energy-Associated Growth Patterns of Magnesium Alloy Dendrites | ACS Omega | 2017,2 :8803-8809 | SCI | Jinglian Du, Ang Zhang, Zhipeng Guo , Manhong Yang, Mei Li, and Shoumei Xiong |
531 | Effect of different solute additions on dendrite morphology and orientation selection in cast binary magnesium alloys | Acta Materialia | 2016,112 :261-272 | SCI,EI | M.Yang; S.-M.Xiong; Z.Guo |
532 | The spatial and temporal distribution of dendrite fragmentation in solidifying Al-Cu alloys under different conditions | Acta Materialia | 2016,121 :384-395 | SCI,EI | E.Liotti; A.Lui; S.Kumar; Z.Guo; C.BibT.Connolley;P.S.Grant |
533 | Characterization of the Grain Structures in Vacuum-Assist High-Pressure Die Casting AM60B Alloy | Acta Metallurgica Sinica-English Letters | 2016,29(7):619-628 | SCI,EI | XB Li, SM Xiong, ZP Guo |
534 | Correlation between Porosity and Fracture Mechanism in High Pressure Die Casting of AM60B Alloy | Journal of Materials Science & Technology | 2016,32(1):54-61 | SCI,EI | X Li, SM Xiong, Z Guo |
535 | Improved mechanical properties in vacuum-assist high-pressure die casting of AZ91D alloy | Journal of Materials Processing Technology | 2016,231 :1-7 | SCI,EI | X Li, SM Xiong, Z Guo |
536 | Development of a Fluid-Particle Model in Simulating the Motion of External Solidified Crystals and the Evolution of Defect Bands in High-Pressure Die Casting | Metallurgical and Materials Transactions B | 2016,47(2):939-947 | SCI,EI | C Bi, S Xiong, X Li, Z Guo |
537 | On the kinetics of dendritic sidebranching: A three dimensional phase field study" | Journal of Applied Physics | 2016,119 :164305- | SCI,EI | S Shang, Z Guo, Z Han |
538 | Development and application of inverse heat transfer model between liquid metal and shot sleeve in high pressure die casting process under non-shooting condition | China Foundry | 2016,13(4):269-275 | SCI | W Yu, Y Cao, Z Guo, S Xiong |
539 | Bio-inspired design of SiCf-reinforced multi-layered Ti-intermetallic composite | Materials & Design | 2016,101 :102-108 | SCI,EI | W Yu, K Zhu, Y Aman, Z Guo, S Xiong |
540 | Two- and three- dimensional studies of dendritic morphology in magnesium alloy by means of synchrotron X-ray microtomography and cellular automaton modelling | IOP Conference Series: Materials Science and Engineering | 2015, :12040 | SCI,EI | M Yang, Z Guo, S Xiong |
541 | EXPERIMENTS AND MODELING OF THREE-DIMENSIONAL DENDRITIC MORPHOLOGY OF MAGNESIUM ALLOY | Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering (ICME 2015) | 2015, :55-61 | SCI,EI | M Yang, Z Guo, S Xiong |
542 | On the porosity induced by externally solidified crystals in high-pressure die-cast of AM60B alloy and its effect on crack initiation and propagation | Materials Science and Engineering A | 2015,633 :35-41 | SCI,EI | X Li, SM Xiong, Z Guo |
543 | Study of dendritic growth and coarsening using a 3-D phase field model: Implementation of the Para-AMR algorithm | IOP Conference Series: Materials Science and Engineering | 2015, :12067 | SCI,EI | Z Guo, SM Xiong |
544 | On solving the 3-D phase field equations by employing a parallel-adaptive mesh refinement (Para-AMR) algorithm | Computer Physics Communications | 2015,190 :89-97 | SCI,EI | Guo, Z. and S. M. Xiong |
545 | DEVELOPMENT OF AN INVERSE HEAT TRANSFER MODEL BETWEEN MELT AND SHOT SLEEVE AND ITS APPLICATION IN HIGH PRESSURE DIE CASTING PROCESS | Acta Metallurgica Sinica | 2015,51(6):745-752 | SCI,EI | Y CAO, S XIONG, Z GUO |
546 | An improved mathematical model to simulate mold filling process in high pressure die casting using CLSVOF methods and CSF model | China Foundry | 2015,12(3):180-188 | SCI | C Bi, Z Guo, S Xiong |
547 | Modelling and simulation for die casting mould filling process using Cartesian cut cell approach | International Journal of Cast Metals Research | 2015,28(4):234-241 | SCI,EI | C Bi, Z Guo, S Xiong |
548 | QUANTIFICATION STUDY ON DENDRITE FRAGMENTATION IN SOLIDIFICATION PROCESS OF ALLUMINUM ALLOYS | Acta Metallurgica Sinica | 2015,51(6):677-684 | SCI,EI | C BI, Z GUO, E Liotti, S XIONG, PS Grant |
549 | Numerical simulation of dendritic growth of magnesium alloy with convection | Chinese Journal of Nonferrous Metals | 2015,25(4):835-843 | EI | Yang, M., Guo Z.,Xiong S. |
550 | Characterisation of the 3-D dendrite morphology of magnesium alloys using synchrotron X-ray tomography and 3-D phase-field modelling | Acta Materialia | 2015,92 :8-17 | SCI,EI | M.Yang; S.-M.Xiong; Z.Guo |
551 | A synchrotron X-ray radiography study of dendrite fragmentation induced by a pulsed electromagnetic field in an A1-15Cu alloy | Acta Materialia | 2014,70 :228-239 | SCI,EI | E.Liotti; A.Lui; R.Vincent; S.Kumar; Z.Guo; T.ConnolleycI.P.Dolbny; M.Hart; L.Arnberg; R.H.Mathiesen; P.S.Granta |
552 | Phase field study of the tip operating state of a freely growing dendrite against convection using a novel parallel multigrid approach | Journal of Computational Physics | 2014,257 :278-298 | SCI | Z.Guo; J.Mi; S.Xiong; P.S.Grant |
553 | Mesh Generation Method of Irregular Boundary Regions Based on FDM | Foundry | 2013,62(5):406-409 | 国内期刊 | Zhang, W., Fang, J., Xiong, S., Guo Z. |
554 | A Synchrotron X-ray Radiography Investigation of Induced Dendrite Fragmentation in Al-15wt%Cu | Light Metals Technology | 2013,765(210):- | SCI,EI | Enzo Liotti, Andrew Lui, Robin Vincent, Sundaram Kumar, Zhi Peng Guo, Thomas Connolley, Michael Hart, Lars Arnberg, Ragnvald H. Mathiesen, Patrick S. Grant |
555 | Phase Field Simulation of Binary Alloy Dendrite Growth Under Thermal- and Forced-Flow Fields: An Implementation of the Parallel-Multigrid Approach | Metallurgical and Materials Transactions B | 2013,44(4):924-937 | SCI,EI | Z Guo, J Mi, S Xiong, PS Grant |
556 | Phase field simulation of multi-dendrite growth in a coupled thermal-solute-convective environment | IOP Conference Series: Materials Science and Engineering | 2012, :- | SCI,EI | Z.Guo; J.Mi; P.S.Grant |
557 | An implicit parallel multigrid computing scheme to solve coupled thermal-solute phase-field equations for dendrite evolution | Journal of Computational Physics | 2012,231(4):1781-1796 | SCI | Z.Guo; J.Mi; P.S.Grant |
558 | Determination of the metal/die interfacial heat transfer coefficient of high pressure die cast B390 alloy | MCWASP XIII | 2012, :- | SCI,EI | Yongyou Cao, Zhipeng Guo and Shoumei Xiong |
559 | Determination of interfacial heat transfer coefficient and its application in high pressure die casting process | China Foundry | 2014,11(4):314-321 | SCI | C Yongyou, G Zhipeng, X Shoumei |
560 | Optimization of the Cooling System of Die for Besturn B50 Clutch Shell | Foundry | 2013,62(3):191-195 | 国内期刊 | Zhang, W., Fang, J., Xiong, S., Guo Z. |
561 | Study on Friction and Wear Behavior of SiCp/AZ91D Nanocomposites | Rare Metal Materials and Engineering | 2012,41(1):110-114 | 国内期刊 | Liu Shiying,Li Wenzhen ,Zhang Qiongyuan,Zhu Xue,He Guangjin,Li Mingyuan |
562 | Friction and Wear Properties of Nano-Sized SiC Particles Reinforced AZ91D Composites | Special Casting & Nonferrous Alloys | 2012,32(10):935-939 | EI | Liu Shiying,Li Wenzhen |
563 | Study on Behavior of Dynamic Fracture in SiC Nanoparticles Reinforced Magnesium Matrix Composites | China Foundry | 2012,61(7):722-726 | SCI | LIU Shiying,LI Wenzhen,HE Guangjin |
564 | Wear behavior of magnesium matrix nanocomposites at room and elevated temperature | Supplemental Proceedings: Materials Processing and Interfaces | 2012, :749-756 | SCI,EI | Li Wenzhen, Liu Shiying |
565 | Influence of nano particle distribution on the strengthening mechanisms of magnesium matrix composites | Acta Materiae Compositae Sinica | 2013,30(2):105-110 | EI | HE Guangji; LI Wenzhen |
566 | Tensile Properties and Fracture Behavior of Nano-Sized SiC Particles Reinforced AZ91D Composites at Elevated Temperature | Rare Metal Materials and Engineering | 2013,42(4):761-765 | 国内期刊 | Liu Shiying,Li Wenzhen ,Zhu Xue,He Guangjin |
567 | Key Technology of Fabrication Magnesium Nano-composites by Ultrasonic Compo-dispersion Method | Foundry Technology | 2013,34(8):965-968 | 国内期刊 | ZHANG Congyang, LI Wenzhen, ZHU Qiaobo, JIN yu |
568 | Mechanical Properties and Fabrication of Carbon Nanotubes Reinforced AZ91D Magnesium Matrix Nanocomposites | Special Casting & Nonferrous Alloys | 2013,33(10):891-894 | 国内期刊 | Zhang Congyang, Li Wenzhen, Jin Yu, Xue Weidong, Gao Weiming |
569 | Microstructures and mechanical properties of carbon nanotubes reinforced AZ91D magnesium matrix composites prepared by squeeze casting | 8th Pacific Rim International Congress on Advanced Materials and Processing 2013 | 2013,2 :1463-1470 | EI | Congyang Zhang, Wenzhen Li, Weidong Xue |
570 | Directional Solidification of Nano-Sized SiC Particles Reinforced AZ91D Composites | Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing | 2013, :2487-2494 | EI | Qiaobo Zhu, Wenzhen Li, Weiming Gao |
571 | CNTs/AZ91D镁基纳米复合材料的制备与力学性能研究 | 特种铸造及有色合金 | 2013,33(10):891-894 | 国内期刊 | 张从阳,李文珍,靳宇,薛卫东,高维明 |
572 | The Nonlinear Finite element Numerical Simulation in the Compacting Process of Molding Sand | Foundry Equipment and Technology | 2014,(2):5-9 | 国内期刊 | LI Wenzhen,WU Junjiao,ZHOU Kelin |
573 | Nanoparticle Capture During Directional Solidification of Nano-Sized SiC Particle-Reinforced AZ91D Composites | JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2015,15(5):3913- 3917 | SCI,EI | Zhu, QB; Liu, HC; Li, WZ; Gao, WM; Li, QS |
574 | Effect of Heat Treatment on Microstructure and Mechanical Properties of Squeeze Cast n-SiCp/AZ91D Magnesium Matrix Composites | Rare Metal Materials and Engineering | 2015,22(2):463- 467 | SCI,EI | Zhang Congyang, Feng Rongyu, Li Wenzhen |
575 | 当代造型和制芯技术研究与发展趋势 | 今日铸造 | 2015,(70):99-103 | 国内期刊 | 李文珍 |
576 | Microstructure evolution and mechanical properties of SiC nanoparticles reinforced magnesium matrix composite processed by cyclic closed-die forging | Materials Science and Engineering A | 2015,642 :49-56 | SCI,EI | Liao, Wenjun; Ye, Bing; Zhang, Li; Zhou, Hao; Guo, Wei; Wang, Qudong; Li, Wenzhen |
577 | 黄铜基超顺排碳纳米管复合材料的设计 | 特种铸造及有色合金 | 2015, :154-157 | 国内期刊 | 帅晶,冯荣宇,靳宇,朱琳,李文珍 |
578 | SACNT增强铜基复合材料的制备与组织性能分析 | 种铸造及有色合金 | 2015, :158-162 | 国内期刊 | 靳宇,李文珍,朱琳,薛卫东 |
579 | Fabrication of superaligned carbon nanotubes reinforced copper matrix laminar composite by electrodeposition | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2015,25(9):2994- 3001 | SCI,EI | Jin Y, Zhu L, Xue WD, Li WZ |
580 | Enhanced strength and excellent transport properties of a superaligned carbon nanotubes reinforced copper matrix laminar composite | Composites: Part A | 2016,88 :148-155 | SCI,EI | Jing Shuai, Lunqiao Xiong, Lin Zhu, Wenzhen Li |
581 | Superaligned Carbon Nanotubes Reinforced Copper Nanocomposites with Enhanced Strength and Electrical Conductivity(Poster Presentation) | TMS 2016 145th Annual Meeting & Exhibition | 2016, :159-166 | SCI,EI | Jing Shuai, Yu Jin, Lin Zhu, Wenzhen Li |
582 | Enhanced Ductility with Significant Increase in Strength of As-Cast CNTs/AZ91D Nanocomposites | TMS 2016 145th Annual Meeting & Exhibition | 2016, :85-92 | SCI,EI | Rongyu Feng, Lin Zhu, Wenzhen Li |
583 | Functionalization of super-aligned carbon nanotube film using hydrogen peroxide solution and its application in copper electrodeposition | Journal of Colloid and Interface Science | 2017,498 :402-412 | SCI,EI | Lunqiao Xiong, Jing Shuai, Zecheng Hou, Lin Zhu, Wenzhen Li |
584 | Microstructure and mechanical properties of the carbon nanotubes reinforced AZ91D magnesium matrix composites processed by cyclic extrusion and compression | Materials Science & Engineering A | 2017,689 :427- 434 | SCI,EI | Li Zhang, Qudong Wang, Wenjun Liao, Wei Guo, Wenzhen Li, Haiyan Jiang, Wenjiang Ding |
585 | Effects of cyclic extrusion and compression on the microstructure and mechanical properties of AZ91D magnesium composites reinforced by SiC nanoparticles | Materials Characterization | 2017,126 :17-27 | SCI,EI | Li Zhang, Qudong Wang, Wenjun Liao, Wei Guo, Bing Ye, Wenzhen Li, Haiyan Jiang, Wenjiang Ding |
586 | Enhanced microstructure homogeneity and mechanical properties of AZ91–SiC nanocomposites by cyclic closed-die forging, Journal of Composite Materials | Journal of Composite Materials | 2017,51(5):681- 686 | EI | Wei Guo, Qu-Dong Wang, Wen-Zhen Li, Hao Zhou, Li Zhang, Wen-Jun Liao |
587 | Effects of ply-orientation on microstructure and properties of super-aligned carbon nanotube reinforced copper laminar composites | Trans. Nonferrous Met. Soc. China | ,27 :1747-1758 | SCI,EI | Jing SHUAI, Lun-qiao XIONG, Lin ZHU, Wen-zhen LI |
588 | Morphology Improvement of Boride in High-Boron Wear Resistance Alloy | FOUNDRY | 2017,66(6):603- 608 | 国内期刊 | WANG Zhi-sheng, CHEN Xiang, LI Yan-xiang |
589 | The Cell Size Reduction of Aluminum Foam with Dynamic Gas Injection Based on the Improved Foamable Melt | Colloids and Surfaces A: Physicochemical and Engineering Aspects | 2017,527 :123- 131 | EI | Ningzhen Wang, Xiang Chen, Yanxiang Li, Zhiyong Liu, Zhipeng Zhao, Ying Cheng, Yuan Liu, Huawei Zhang |
590 | Modelling on Macro Deformation Behavior of Thin-Walled Aluminum Foam with Varying Cell Morphology by Gas Injection Method | Journal of Materials Engineering and Performance | 2017,26(7):3307- 3318 | SCI,EI | Chen Xiang, Wang Ningzhen, Yuan Jianyu, Li Yan-xiang, Zhang Huawei, Liu Yuan |
591 | Microstructure and Mechanical Properties of Refractory HfMo0.5NbTiV0.5Si High-Entropy Composites | Journal of Alloys and Compounds | 2017,694 :869- 876 | SCI,EI | Yuan Liu, Yan Zhang, Heng Zhang, Naijuan Wang, Xiang Chen, Huawei Zhang, Yanxiang Li |
592 | Microstructural Homogenization and High-Temperature Cyclic Oxidation Behavior of a Ni-Based Superalloy with High-Cr Content | Journal of Alloys and Compounds | 2017,727 :410- 418 | SCI,EI | Heng Zhang, Yuan Liu, Xiang Chen, Huawei Zhang, Yanxiang Li |
593 | Influence of Withdrawing Speed on the Porous Structures of Gasar Ingots Fabricated by Bridgman Method | Journal of Materials Processing Technology | 2017,245 :106- 114 | SCI,EI | YHe, YXLi, HWZhang, Yliu |
594 | Foaming Process and Properties of 6063 Aluminum Foams by Melt Foaming Method | Materials Transactions | 2017,58(2):243- 248 | SCI,EI | Shi Tong, Chen Xiang, Cheng Ying, Li Yanxiang |
595 | Fabrication of High-Porosity Lotus-Type Porous Aluminum in Vacuum | Metallurgical and Materials Transactions A | 2017,48(3):1264- 1272 | SCI,EI | XBLiu, YXLi, Yhe |
596 | Fabrication of Gasar Ingots with Straight Parallel Pores by a Bridgman Method | Journal of Materials Processing Technology | 2017,249 :128- 134 | SCI,EI | YHe, YXLi, HWZhang, Yliu |
597 | Fabrication of Aluminum Foams with Small Pore Size by Melt Foaming Method | Metallurgical and Materials Transactions B | 2017,48(2):754- 762 | SCI,EI | Ying Cheng, Yanxiang Li, Xiang Chen, Tong Shi, Zhiyong Liu, Ningzhen Wang |
598 | Effects of Composition and Growth Rate on the Microstructure Transformation of β-Rods/Lamellae/α-Rods in Directionally Solidified Mg-Li Alloy | Materials & Design | 2017,119(5):199- 207 | SCI,EI | Dan LIU, Huawei ZHANG, Yanxiang LI, Xiang CHEN, Yuan LIU |
599 | Pore Structure Analysis of Large Size Gasar Cu Ingot Prepared by Bridgman Method | Materials Science Forum | 2017,898 :1266- 1275 | EI | Y He, Y X Li, H W Zhang, Y liu |
600 | Study on Heat Transfer Enhancement of Lotus-type Porous Copper Heat Sink | Journal of Refrigeration | 2016,37(3):94-99 | 国内期刊 | Wu Jian, Liu Yuan, Li Yanxiang, Zhang Huawei |
601 | Three-Point Bending Performance of a New Aluminum Foam Composite Structure | Transactions of Nonferrous Metals Society of China | 2016,26(2):359- 368 | SCI,EI | Wang Ningzhen, Chen Xiang, Li Ao, Li Yanxiang, Zhang Huawei, Liu Yuan |
602 | Synthesis of a Bimodal Porous Cu with Nanopores on the Inner Surface of Gasar Pores: Influences of Preparation Conditions | Applied Surface Science | 2016,360 :148- 156 | SCI,EI | Ming Du, Yanxiang Li, Huawei Zhang, Yuan Liu, Xiang Chen |
603 | Microstructure of Nb-Ta-V Based Hydrogen Permeation High Entropy Alloys | Materials Science Forum | 2016,849 :3-7 | EI | NaijuanWANG, YuanLIU |
604 | Microstructure and Mechanical Properties of a New Refractory HfNbSi0.5TiVZr High Entropy Alloy | Materials Science Forum | 2016,849 :76-84 | EI | Yan Zhang, Yuan Liu, Yanxiang Li, Xiang Chen and Huawei Zhang |
605 | Microstructure and Mechanical Properties of a Refractory HfNbTiVSi0.5 High-Entropy Alloy Composite | Materials Letters | 2016,174 :82-85 | SCI,EI | Yan Zhang, Yuan Liu, Yanxiang Li, Xiang Chen, Huawei Zhang |
606 | Fabrication, Magnetostriction Properties and Applications of Tb-Dy-Fe Alloys: a Review | China Foundry | 2016,13(2):75-84 | SCI | Nai-juan Wang, Yuan Liu, Hua-wei Zhang, Xiang Chen, Yan-xiang Li |
607 | Fabrication of a Hierarchical Trimodal Structure with Nano-Cellular Cu2O, Nano-Porous Cu and Micro-Porous Gasar Cu | Materials Letters | 2016,164 :583- 586 | SCI,EI | Ming Du, Hua-wei Zhang, Yan-xiang Li, Yuan Liu, Xiang Chen, Yun He, Ying Cheng |
608 | Effects of Carbon Content on High-Temperature Mechanical and Thermal Fatigue Properties of High-Boron Austenite Steels | China Foundry | 2016,13(1):1-8 | SCI | Chen Xiang, Wang Zhisheng, Li Yanxiang, Zhang Huawei, Liu Yuan |
609 | Effect of Orifice Diameter on Bubble Generation Process in Melt Gas Injection to Prepare Aluminum Foams | Metallurgical and Materials Transactions B | 2016,164 :1-12 | SCI,EI | Jianyu Yuan, Yanxiang Li, Ningzhen Wang, Ying Cheng, and Xiang Chen |
610 | Bubble Formation at a Submerged Orifice in High-Speed Horizontal Oscillation | Metallurgical and Materials Transactions B | 2016,47(6):3362- 3374 | SCI,EI | Wang Ningzhen, Chen Xiang, Yuan Jianyu, Wang Guiquan, Li Yan-xiang, Zhang Huawei, Liu Yuan |
611 | Evaluation of Melt Features for Liquid Ductile Iron | China Foundry | 2015,51(11):1062-1068 | SCI | CHEN Xiang, LI Yan-xiang |
612 | The Stability of Aluminum Foams at Accumulation and Condensation Stages in Gas Injection Foaming Process | Colloids and Surfaces A | 2015,482 :468- 476 | EI | Y T Zhou, Y X Li, J Y Yuan |
613 | Study on Quasi-Static Compressive Properties of Aluminum Foam-Epoxy Resin Composite Structures | Composites Part B-Engineering | 2015,79 :301-310 | SCI,EI | Yuan Jianyu, Chen Xiang, Zhou Wenwu, Li Yanxiang |
614 | Oxide Film on Bubble Surface of Aluminum Foams Produced by Gas Injection Foaming Process | Transactions of Nonferrous Metals Society of China | 2015,25(7):2429- 2437 | SCI,EI | Y T Zhou, Y X Li |
615 | Oxidation Kinetics of Oxide Film on Bubble Surface of Aluminum Foams Produced by Gas Injection Foaming Process | Transactions of Nonferrous Metals Society of China | 2015,25(8):2781- 2788 | SCI,EI | Y T Zhou, Y X Li |
616 | Inner Surface Alloying on Pores of Lotus-Type Porous Copper through Electroless Plating with Supersonic Vibration and Annealing Treatment | Surface & Coatings Technology | 2015,261 :1-6 | SCI,EI | M Du, H Zhang, Y Li |
617 | Heat Transfer Performance of Lotus-Type Porous Copper Heat Sink with Liquid GaInSn Coolant | International Journal of Heat and Mass Transfer | 2015,80 :605-613 | SCI,EI | Y Liu, H F Chen, H W Zhang, Y X Li |
618 | Fabrication and Wettability of Monolithic Bimodal Porous Cu with Gasar Macro-Pores and Dealloying Nano-Pores | Applied Surface Science | 2015,353(10):804-810 | SCI,EI | Ming Du, Hua-wei Zhang, Yan-xiang Li, Yuan Liu, Xiang Chen, Yun He |
619 | Evolution of Porous Structure with Dealloying Corrosion on Gasar Cu-Mn Alloy | Transactions of Nonferrous Metals Society of China | 2015,25(4):1200- 1205 | SCI,EI | X Zhang, Y Li, H Zhang, Y Liu |
620 | Effects of Cell Wall Property on Compressive Performance of Aluminum Foams | Transactions of Nonferrous Metals Society of China | 2015,25(5):1619- 1625 | SCI,EI | J Y Yuan, Y X Li |
621 | Effect of Orifice Geometry on Bubble Formation in Melt Gas Injection to Prepare Aluminum Foams | Science China-Technological Sciences | 2015,58(1):64-74 | SCI,EI | J Yuan, Y X Li |
622 | Effect of Melt Superheat on Structural Uniformity of Lotus-Type Porous Metals Prepared by Unidirectional Solidification | Transactions of Nonferrous Metals Society of China | 2015,25(3):1004- 1010 | SCI,EI | Y Liu, H Zhang, Y X Li |
623 | Depositing and Alloying on the Inner Surface of Gasar Cu Pores by Plating and Annealing Treatment | Applied Surface Science | 2015,324 :69-75 | SCI,EI | Ming Du, Huawei Zhang, Yanxiang Li, Yuan Liu, Xiang Chen, Yun He |
624 | Modeling and Simulation of Influence of Solidification Velocity on the Structure of Porous Copper and Aluminum | Materials Science Forum | 2015,817 :433- 438 | EI | Q Q Yang, Y Liu, Y X Li |
625 | EFFECTS OF B ON HIGH TEMPERATURE MECHA-NICAL PROPERTIES AND THERMAL FATIGUE BEHAVIOR OF COPPER DIE-CASTING DIE STEEL | Acta Metallurgica Sinica | 2015,51(5):519- 526 | SCI,EI | Zhisheng WANG,Xiang CHEN,Yanxiang LI,Huawei ZHANG,Yuan LIU |
626 | Effects of Boron on High Temperature Oxidation Resistance Properties of High-Boron Austenite Steel | Special-cast and Non-ferrous Alloys | 2015,39(9):916- 919 | 国内期刊 | Wang Zhisheng, Chen Xiang, Li Yanxiang, Zhang Huawei, Liu Yuan |
627 | A Study of Duplex Melting Process with Blast and Medium Frequency Furnaces in the Production of Cast Iron | Proceedings of the 2015 International Conference on CSET & MSBE | 2016:739-747 | SCI | Chen Xiang, Zhou Wenwu, Li Yanxiang |
628 | Morphology Improvement of Boride in High-Boron Wear Resistance Alloy | China Foundry | 2017,6 :603-608 | SCI | WANG Zhi-sheng, CHEN Xiang, LI Yan-xiang |
629 | Factors Influencing Foam Height in Gas Injection Process for Aluminum Foams | Advanced Materials Research | 2015,1104 :33-37 | SCI,EI | Yuan Jianyu, Li Yanxiang, Chen Xiang, Zhou Yutong |
630 | Bubble Size Control during the Gas Injection Foaming Process in Aluminum Alloy Melt | Journal of Materials Research | 2015,30(7):1002- 1010 | SCI,EI | Liu Xingnan, Li Yanxiang, Chen Xiang |
631 | Study of microstructure of A356 aluminum foams produced by melt foaming and gas injection foaming processes | Journal of Functional Materials | 2014,45(7):7030- 7034 | EI | ZHOU Yu-tong YUAN Wen-wen LI Yan-xiang |
632 | MODELING AND SIMULATION OF STRUCTURAL FORMATION OF POROUS ALUMINUM IN GASAR SOLIDIFICATION | Acta Metallurgica Sinica | 2014,50(11):1403-1412 | SCI,EI | YANG Qianqian, LIU Yuan, LI Yanxiang |
633 | Enhancement of the heat transfer for directionally solidified porous copper heat sinks by cutting into sections | Journal of Tsinghua University | 2014,54(9):1250- 1254 | EI | L Chen, H Zhang, Y Liu, LI Yanxiang |
634 | Toughness Improvement of Austempered Boron Alloyed High Silicon Ferrous Alloy | China Foundry | 2014,63(2):105- 109 | SCI | CHEN Xiang, HU Xiao, LI Yan-xiang |
635 | EFFECT OF WITHDRAWING RATE ON PORE MORPHOLOGY OF LOTUS-TYPE POROUS COPPER PRODUCED BY SINGLE-MOLD GASAR TECHNIQUE | ACTA METALLURGIca SINICA | 2014,50(8):921- 929 | SCI,EI | ZHUO Weijia, LIU Yuan, LI Yanxiang |
636 | Pore Structure of Unidirectional Solidified Lotus-Type Porous Silicon | Transactions of Nonferrous Metals Society of China | 2014,24(11):3517-3523 | SCI,EI | Q Q Yang, Y Liu, Y X Li, H Zhang |
637 | Influence of the Solidification Temperature Range on Gasar Structures Made from Cu-Mn Alloys | International Journal of Materials Research | 2014,105(9):869- 874 | SCI,EI | X Zhang, Y Li, Y Liu, H Zhang |
638 | Hydrogen Diffusion Coefficient in Liquid Metals Evaluated by Solid-Gas Eutectic Unidirectional Solidification | Transactions of Nonferrous Metals Society of China | 2014,24(12):4030-4037 | SCI,EI | Q Q Yang, Y Liu, Y X Li |
639 | Fabrication of Lotus-Type Porous Micro-Channel Copper by Single-Mold GASAR Technique | China Foundry | 2014,11(6):522- 530 | SCI | Y Liu, W J Zhuo, H W Zhang, Y X Li |
640 | Effect of Contact Angle on Bubble Formation at Submerged Rrifices | Journal of Materials Science | 2014,49(23):8084-8094 | SCI,EI | J Yuan, Y Li, Y Zhou |
641 | 炉前热分析技术定量测评灰铸铁弹性模量 | 2014中国铸造活动周论文集 | 2014, :- | 国内期刊 | 周文武, 陈祥, 李言祥 |
642 | Simulation on Heat Transfer Performance of Directionally Solidified Porous Copper Heat Sink | Advanced Materials Research | 2014,875-877 : 1095-1100 | SCI,EI | L T Chen, H W Zhang, Y Liu, Y X Li |
643 | Hybrid Porous Metal of Nano-Micro Double Size and Regular-Random Bimodal | EPD Congress 2014 | , :367-374 | EI | X M Zhang, H W Zhang, Y X Li |
644 | Fabrication of micro-nano double scale porous metal by dealloying to GASARITE | Materials Science and Technology | 2013,21(4):12-17 | SCI,EI | ZHANG Xing-ming, LI Yan-xiang, LIU Yuan, ZHANG Hua-wei |
645 | Microstructure and Mechanical Properties of a New Type of Austempered Boron Alloyed High Silicon Cast Steel | China Foundry | 2013,10(3):156- 161 | SCI | CHEN Xiang, LI Yanxiang |
646 | Fabrication of a Three-Dimensional Bimodal Porous Metal | Materials Letters | 2013,106 :417- 420 | SCI,EI | X Zhang, Y Li, H Zhang, Y Liu |
647 | Experimental Study on Heat Transfer Performance of Lotus-Type Porous Copper Heat Sink | International Journal of Heat and Mass Transfer | 2013,56(1-2):172-180 | SCI,EI | H W Zhang, L T Chen, Y Liu, Y X Li |
648 | Deformation Characteristics of Aluminum Foams by Gas Injection Method during Uniaxial Compression | Advanced Science Letters | 2013,19 :1749- 1753 | SCI | YUAN Jian-yu, CHEN Xiang, ZHANG Hui-ming, LI Yan-xiang |
649 | Effect of Boron on Properties of Copper Alloy Die Casting Hot Work Die Steel | Foundry | 2017,6(6):603-608 | 国内期刊 | WANG Zhi-sheng, CHEN Xiang, LI Yan-xiang |
650 | Heat Transfer Performance of Lotus-Type Porous Copper Micro-Channel Heat Sink | Materials Science Forum | 2013,749 :414- 420 | EI | H F Chen, Y Liu, L T Chen, Y X Li |
651 | Fabrication of Lotus-Type Porous Silicon by Unidirectional Solidification in Pressurized Hydrogen Atmosphere | Materials Science Forum | 2013,749 :217- 222 | EI | Q Q Yang, Y Liu, Y X Li |
652 | Comparison of Cell Wall Microstructure of Al Foams Produced by Melt Foaming and Gas Injection Foaming Processes | Applied Mechanics and Materials | 2013,457-458 : 540-543 | SCI,EI | Y T Zhou, Y X Li, X N Liu, W W Yuan |
653 | Bubble Formation at a Submerged Orifice for Aluminum Foams Produced by Gas Injection Method | Metallurgical and Materials Transactions A | 2013,44(2):729- 737 | SCI,EI | Fan Xueliu, Chen Xiang, Liu Xingnan, Li Yanxiang |
654 | Microstructure and Mechanical Properties of Austempered High Boron Cast Iron with Modification and Its Mechanism Discussion | Advanced Materials Research | 2013,744 :349- 352 | SCI,EI | Hu Xiao, Chen Xiang, Li Yanxiang |